Pop up:

4 Added

1 Removed

Added:

Chan 518 – Kiss

Chan 519 – The Box

Chan 521 – Smashhits

Chan 524 – Kerrang

All the above on 12480 V

Removed:

Chan 512 – Channel AKA

If you bought it on the understanding it was new – not display or customer return, then take it back and demand a new/unused replacement.

A new unit should have protective film covering it as well.

Codes for different variants of remote can be downloaded via this link:

http://www.humaxdigital.com/uk/support/rcucodelist.asp

Welcome to the Forum

Try this:

•Switch on your Freesat/Freeview (in you case HDR 7500T) Box

•Take the batteries out of your remote control

•Point your remote at the receiver on the box hold down the standby button for about 15 seconds

•Put the batteries back in

If all has gone well it should drain all power from the remote and cause it to reset itself.

Another cause could be a mismatch of the remote code in use between unit and remote see this FAQ

Caveat – I have no idea if your specific unit has this facility, but the remote almost certainly will, so it mght be an idea to step thru all 6 codes in turn (with unit powered off initially, and then on when code has been changed on remote)

As for radio, once you gain control of unit, bring up guide, press blue button and select TV. Highlighted should be on a programme currently on air, press OK to switch to that programme.

Agree with Graham, replies are confusing which is why I took no further part.

As OP now returning the unit, no point in thread remaining open.

I also take great exception to the comment re this forum.

Thread closed.

Does the Menu button not give you access to Record menu option etc.