Forum Replies Created
-
AuthorPosts
-
Barry
ModeratorThe DTR T1010 is a YouView unit.
There are no adjustments for aspect ratio setting on this unit, so you need to check your TV settings.
Barry
ModeratorPop up on V13
1 Added, and 1 Changed:
Added:
Chan 133 Channel 5+24 10964 H
Changed:
Chan 132 change name to 5*+1
Barry
ModeratorI do not have this box currently connected up, but will set it up if no one else can help, however, in the meantime….
If I remember correctly holding down the AD button whilst pressing volume switches temporarily to controlling the 2110 vol rather then TV.
Barry
ModeratorThis might not help OP but my experience with a Foxsat HDR link to TV via a no name cheapo auto HDMI 5 port switch.
The Foxsat does not power up the HDMI switch nor change input unless I fire up another device on the switch first, in my case a Humax HB 1000S, it then performs OK.
If the OP is considering changing the Foxsat HD for another then the HB 1000S might a solution, and available from Humax Direct as a managers special (refurb) for £69 plus p&p, add an external HDD and you have a single tuner recorder
Barry
ModeratorWelcome to our Forum

I’ve already mentioned in post #2 that Humax are aware and engineers are investigating.
As for itv player and 4OD – never promised and never going to appear on this unit I suspect.
Barry
ModeratorWelcome to our Forum

It would help if you could tell us which unit you are having this problem with.
Barry
ModeratorWhen you get the ‘enter maintenance mode y/n prompt you should be pressing/touching the power button to confirm not the central button.
Barry
ModeratorYou are welcome.
Please keep us updated on how it performs.
Barry
ModeratorBarry
ModeratorMore then once..i.e. it returned on next boot…some 6 hours later.
Barry
ModeratorWelcome to our Forum

As per Humax UK terrestrial products I would guess that you can only record from inbuilt tuners not external input.
Barry
ModeratorMy HDR 1800T and 2000T were actually recording when I checked, pop up dismissed by highlighting later, timers recorded without issue.
Have just checked subsequent timers – dismissing pop up highlighting later and they have recorded without issue.
Barry
ModeratorDid you ignore the on screen message then.
Barry
ModeratorChanges now taken place in my region YMMV
Retune of HD T2 – Old LCN’s remain in place with message in guide re new channel number.
YouView – updated listings automatically.
Barry
ModeratorNo idea why, but you could try a factory reset.
-
AuthorPosts