- This topic has 8 replies, 3 voices, and was last updated 10 years, 11 months ago by
.
-
Posts
-
Humax 2000T
Why is the volume control so poor Can’t increase volume beyond 20 which is to low on new humax my TVis a phillips
Hi welcome to our forum. Try setting the volume control on the HDR-2000T control remote to maximum. From then on use the TV volume to adjust.
It might be a silly question, but how do I set the HDR-2000T to maximum as the remote controls both the TV and Humax?
gran – 16 minutes ago »
It might be a silly question, but how do I set the HDR-2000T to maximum as the remote controls both the TV and Humax?
Tune the box to a SD channel
Set the remote to control the TV and turn down it’s volume (so you don’t get deafened
).Set the remote to control the HDR-2000T. Turn up the box volume to full.
Set the remote to control the TV – adjust the volume to a normal listening level.
Tune to a HD channel. If the volume is significantly different, in the HDR-2000T TV setup menu change the audio output to stereo.
Sorry, I am obviously not being very bright. How do I tune the box to a SD channel? I realise that I could switch the TV off standby using the TV remote controller and turn the volume right down with the TV remote (fair point!)
I have set the digital audio output to stero, audio MPEG, DAO to PCM – but I did that ages ago and have no idea now how I did it!
gran – 1 hour ago »
Sorry, I am obviously not being very bright. How do I tune the box to a SD channel? I realise that I could switch the TV off standby using the TV remote controller and turn the volume right down with the TV remote (fair point!)
I have set the digital audio output to stero, audio MPEG, DAO to PCM – but I did that ages ago and have no idea now how I did it!
Examples
SD – standard definition
BBC1 SD channel 1, BBC2 SD channel 2, ITV SD channel 3 and CH 4 SD channel 4
HD – high definition
BBC1 HD 101, BBC 2 HD 102, ITV HD 103 and CH4 HD 104
thank you for your help
gran – 2 hours ago »
thank you for your help
You are welcome. Did it solve the problem ?
Err yes. I have to remember to use the TV remote to alter the volume. I find that if I use the Humax remote to select TV, the TV gets confused and switches from HDMI to TV and complains I have no signal. Then I have to spend ages faffing about with both cremotes in order to receive the TV signal via the Humax box.
- You must be logged in to reply to this topic.