S/w update

Forum › Forums › Freeview SD › PVR 9150T, 9200T, 9300T › S/w update

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • August 11, 2011 at 8:48 am #12298
    Anonymous
    Inactive

    I have two PVR-9200T one of which is on s/w version PGXTF 1.00.21 and is presenting problems and locking out when using the remote control.

    I also have a second machine which is on PGXTF 1.00.23 and is working perfectly.

    Can anyone please advise how to upgrade both machines to the latest software version.

    Thank you.

    August 11, 2011 at 8:57 am #27515
    Anonymous
    Inactive

    Have a look here.

    The latest software was last transmitted OTA just a few weeks ago, I would check your Software Auto Update settings.

    August 12, 2011 at 7:38 am #27516
    Anonymous
    Inactive

    I have checked both machines and they are set up the same using factory defaults and running from the same arial. I just want them to be at the same level of software.

    August 12, 2011 at 7:46 am #27517
    Barry
    Moderator

    Belated welcome to the Forum :-)

    1.00.23 is the latest for the 9200, puzzled as to why one of your units has not picked up the numerous OTA’s, do you leave it switched on per chance?

    Repeat of the OTA maybe available soon if you do not want to try updating via cable/PC.

    August 13, 2011 at 7:56 am #27518
    Anonymous
    Inactive

    Thanks Barry

    The 9200 that is on v1.00.21 is in the bedroom and we tend to leave this on most of the time.

    Interested in your suggestion about updating via cable/PC perhaps you could elucidate on this. Are there any articles that illustrate the procedure?

    Thanks once again.

    August 13, 2011 at 8:27 am #27519
    Barry
    Moderator

    Units have to be in standby to pick up OTA’s automatically.

    See:

    http://www.humaxdigital.com/uk/support/downloadcenter_model.aspx?category_seq=56

    For software, and download instructions.

    August 13, 2011 at 9:43 am #27520
    Anonymous
    Inactive

    Kennyboy – 1 hour ago  » 

    …..

    Are there any articles that illustrate the procedure?

    You must have missed the link in my first post. :?

    August 17, 2011 at 12:42 pm #27521
    Anonymous
    Inactive

    Thanks to both of you I have now managed to update both units to PGXTF 1.00.23 using a null modem cable and a serial to USB converter. I had to change the settings on the com port of my laptop (obvious in hindsite) to get handshaking working. This will be the way for me in future as for some reason (I know not why) despite having on and off settings to set to disabled the second unit keeps switching from standby to power on at regular intervals.

    Once again thanks – where would I have been without you both.

    Kennyboy

    August 17, 2011 at 5:05 pm #27522
    aldaweb
    Participant

    Did you do a default reset after the update? If not do that and remember to note down existing settings and schedules as these will be reset.

    If you have already done the default reset try setting an on and off time, exit menu and then and then disable them again. For some reason this has worked in the past.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.

The inner genius!