Starting up trouble

Forum › Forums › Freeview HD › HDR 1800T, 2000T › Starting up trouble

Tagged: ,

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 6, 2015 at 11:27 am #16715
    Anonymous
    Inactive

    I’m a new owner of a HumaxHDR-2000T and currently have just installed update UKTFAC 1.01.13. (I’ve had the box 2 days!) but when I turned it on this morning it needed new software update and wouldn’t let me do anything else until it was done. 1 hour 50 mins later it had installed (what the hell!) but now is downloading and has been stuck on 50% for a full 45 mins!

    Do I turn it off and start again as red warning light tells me not to. Or throw it in the brook that runs by side of my house. Very frustrated.

    Also yesterday when I got it working ok, each time I turned TV off I had to use the AV button on TV remote go find hdmi and select another nightmare. I didn’t have problems like this with my old Humax. Any help would be appreciated got grandkids for another 24 hours and it’s torture without the TV – help!

    April 6, 2015 at 11:46 am #60699
    grahamlthompson
    Participant

    Hi welcome to our forum. Update the software using a usb memory stick.

    See this thread.

    http://myhumax.org/forum/topic/software-update-stuck-on-50

    April 6, 2015 at 11:47 am #60700
    Barry
    Moderator

    Welcome to our Forum :-)

    See This Thread for a lot of info, however to recover your unit you could try:

    http://myhumax.org/forum/topic/software-update-stuck-on-50/page/4#post-36444 and then try updating via usb.

    Edit: Graham beat me to it again.

    April 6, 2015 at 12:09 pm #60701
    Anonymous
    Inactive

    Hi. Sod’s law. As soon as I’d posted to this forum the download finished and I managed to start TV (via AV button). However the media button will not bring anything up now?

    Thanks for your help guys

    April 6, 2015 at 12:16 pm #60702
    grahamlthompson
    Participant

    Babsnn – 4 minutes ago  » 

    Hi. Sod’s law. As soon as I’d posted to this forum the download finished and I managed to start TV (via AV button). However the media button will not bring anything up now?

    Thanks for your help guys

    Try removing the power for say 10 minutes and re-booting. You may have to boot twice if the same as earlier Humax Freeview+ boxes. If that doesn’t work a factory reset may be needed.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

The inner genius!