Software version 1.00.20 available OTA and Beta Site

Forum › Forums › Freesat HD › FOXSAT HDR › Software version 1.00.20 available OTA and Beta Site

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • March 21, 2012 at 12:03 pm #12987
    Barry
    Moderator

    • Resolved rebooting issue relating to bad sectors on the HDD

    • Hang-up improvements

    http://beta.humaxonline.co.uk/downloads/foxsat-hdr

    March 21, 2012 at 3:14 pm #30946
    Anonymous
    Inactive

    Barryd do you have an OTA date? – nothing as yet of the DTG site.

    March 21, 2012 at 4:14 pm #30947
    Barry
    Moderator

    REPASSAC – 59 minutes ago  » 

    Barryd do you have an OTA date? – nothing as yet of the DTG site.

    No details comfirmed as yet.

    March 28, 2012 at 12:02 am #30948
    Anonymous
    Inactive

    I followed the instructions on the Humax site to the letter and came a cropper. Instead of….

    5. Pull out the USB memory stick and connect the USB to the front panel of FOXSAT-HDR.

    6. Press and hold the STANDBY button on the front of the product. The product will now start up and the download process should start, please keep the STANDBY button held in for 30 seconds and then release. The following screen should appear on the TV set while the download takes place.

    …I would suggest it ought to read….

    5. Pull out the USB memory stick and connect the USB to the front panel of FOXSAT-HDR. You should see ‘USB device has been detected.’ on the screen.

    6. Press the STANDBY button on the front of the product or the remote and then press and hold the STANDBY button on the front of the product. Please keep the STANDBY button held in for 30 seconds and then release. The product will now start up and the download process should start. The following screen should appear on the TV set while the download takes place.

    What the instructions fail to do is to not get the person doing the update to switch the unit off before pressing and holding the Standby button on the unit. All that happens if you follow the Humax instructions is that you switch the unit off as you’d already switched it on in stage 4!

    March 28, 2012 at 6:43 am #30949
    Barry
    Moderator

    Welcome to the Forum :-)

    Following the link that is provided in the txt file that accompanies the software update zip:

    Para 4 quite clearly states:

    Place the product into standby mode…

    So I do not understand your problem.

    April 5, 2012 at 8:25 pm #30950
    Anonymous
    Inactive

    Barry – see 1.00.17 ends on the 11th? Does 1.00.20 commence then?

    April 6, 2012 at 5:40 am #30951
    Barry
    Moderator

    I was aware it was not going to be until after Easter, so I presume so.

    April 10, 2012 at 1:31 pm #30952
    Barry
    Moderator

    1.00.20 should start tomorrow.

    April 11, 2012 at 5:38 am #30953
    Barry
    Moderator

    DTG website now lists 1.00.20 as commencing today – normally the update is on air approx 10am.

    If I get chance will check and report then.

    April 11, 2012 at 9:04 am #30954
    Barry
    Moderator

    Update is on air.

    April 11, 2012 at 9:24 am #30955
    Barry
    Moderator

    For those unaware:

    The OTA takes approx 15 minutes to download, once complete the unit progresses through 5 programming phases, before end appears on the front display, and the unit reboots.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.

The inner genius!