- This topic has 3 replies, 3 voices, and was last updated 11 months, 1 week ago by
.
-
Posts
-
My Humax HDR-FOX T2 will not boot. It goes into a continuous loop. The display shows “starting system” and a few seconds later the same thing happens again.
I remembered it was programmed to record “Nightsleeper”. When the program started I pressed the power button on the remote and the PVR was working perfectly. I did a factory reset but it made no difference. I have programmed it to record the BBC news at 13:00 and 18:00. So I can make it work for a few hours before it shuts down due no activity.
The PVR is on its last legs. My question is if I buy a HDR-FOX T2 on ebay can I play the films I have saved on an external USB hard drive.
Mike 1011 – 7 hours ago »
The PVR is on its last legs. My question is if I buy a HDR-FOX T2 on ebay can I play the films I have saved on an external USB hard drive.
Are the films saved as SD or HD recordings? If they are SD and you copied them direct to the USB hard drive then you should be able to play them. If they are HD they will be encrypted and the only way to play them will be by using the custom firmware. Try asking at https:/hummy.tv
Most of the films are sd. Thanks for the info.
Mike 1011 – 2 mnths ago »
My Humax HDR-FOX T2 will not boot. It goes into a continuous loop. The display shows “starting system” and a few seconds later the same thing happens again.
That sounds like a known problem with a faulty 4u7 capacitor. Details can be found on https://hummy.tv/
- You must be logged in to reply to this topic.