- This topic has 11 replies, 8 voices, and was last updated 9 years, 3 months ago by
.
-
Posts
-
As title says, no sound when broadcasting. It timeshares with CBeebies HD, which has sound. Looking at other forums, it appears it is a problem on this particular PVR.
I noticed this the other day – I’ve just retuned to see if it helps but there doesn’t seem to be anything on the channel at the moment but I’ll have a look later when there’s some broadcasts scheduled. Edit: I read elsewhere someone tried a full reset with no joy.
BlackGhost – 42 minutes ago »
I read elsewhere someone tried a full reset with no joy.
I suspect I’ve seen that post. The poster also stated that they lost all their recordings due to the reset.
You could try a ‘Factory Defaults’ which will NOT delete recordings, but it will delete your recording schedule.
Because their recordings were deleted it sounds that they are not describing a ‘Factory Defaults’ but what sounds more like a disk format.
I just tried mine and there is no sound on Channel 114 via the 4000T, but I do have sound if I view it directly from my Samsung TV, so it’s definitely a Humax fault.
Mine’s exactly the same, although sound available on 114 thru my Hisense set
Just found this on DS
“I have a FVP400T too with the same problem. If you pause the channel and then press play, the audio is then ok.”
Have tried this and can confirm it works !!!
I was just watching channel 114 showing football without sound. I have found that if you want to watch it with sound just press the red button and then the blue button to choose the interactive channel that’s showing the same thing. Its clearly a fault with the receiver. I get a split second of sound when I switch to the channel and then nothing
I believe some users may have already contacted Humax support over this issue, I have highlighted to Humax Towers as well.
Phil1 – 7 hours ago »
I was just watching channel 114 showing football without sound. I have found that if you want to watch it with sound just press the red button and then the blue button to choose the interactive channel that’s showing the same thing. Its clearly a fault with the receiver. I get a split second of sound when I switch to the channel and then nothing
The 608 channel which you switch to is very low quality visually. Has that got any redeming features over the other couple of work rounds?
The other couple of work rounds are:
(1) Record it and watch in chase play
(2) The record variation where you watch the live channel but first pause the live channel for a few seconds (see post #6 just above yours).
If members care to check later I’ll think you will find this problem has now been fixed by the BBC ie not a Humax problem.
When the channels were updated in readiness for the Olympics the issue did indeed exist but it only lasted for a few days and my box has not been updated again, so I can concur that the problem must have been with the transmission and not the Humax unit.
- You must be logged in to reply to this topic.