- This topic has 8 replies, 5 voices, and was last updated 9 years, 11 months ago by
.
-
Posts
-
Hiya, Just replaced an old Thomson PVR with a Humax HDR-Fox T2. With the Thomson I was able to have the main UHF Aerial cable go into PVR, then out to a splitter/booster box, which then sent the signal from Thomson to other TV’s located around the house so we could watch recorded programmes in any room. Having trouble trying to do the same with the Humax – works OK to main TV, but then that’s connected via the HDMI lead. But can’t tune any of the other TV’s in the house to receive any signal from the Humax. Is it possible to send signal from Humax via the UHF Aerial cable out to a splitter box or do I need to alter any setup etc. Have emailed Humax tech support with same question, but they haven’t come back to me
Any help would be much appreciated!
Cheers, Col
Col – 1 hour ago »
But can’t tune any of the other TV’s in the house to receive any signal from the Humax. Is it possible to send signal from Humax via the UHF Aerial cable out to a splitter box or do I need to alter any setup etc.
You need to buy a modulator to plug into the SCART socket.
Or re-use any old VCR to do that job.
Ah-ha, that makes sense as I did have the old PVR connected through a VCR. Thought the Humax had a modulator built in, but maybe not then. Cheers people
Col – 1 hour ago »
Thought the Humax had a modulator built in, but maybe not then.
The SD models have a built in modulator but the later HD models do not.
hmmmm… so, if I got a scart modulator, would that affect signal to other TVs as we’ve already got pretty poor signal strength in this area? Also, I’ve read somewhere that some PVRs automatically cut the signal to scart if an HDMI lead is used, does the Humax do this or can it send signal to both at the same time?
Col – 5 hours ago »
can it send signal to both at the same time?
Both at the same time.
I have an 1100s Humax with only the HDMI connection to my main TV. Is there any way I can get the signal to a 2nd TV? Just binned Sky, but managed to connect it to 2 other TV’s by the aerial connection to the one in the kitchen, and a video sender to the TV in the bedroom ! I miss having the TV in the kitchen, as I spend so much time there ! Any help greatly appreciated
Resqdogs – 11 hours ago »
I have an 1100s Humax with only the HDMI connection to my main TV. Is there any way I can get the signal to a 2nd TV? Just binned Sky, but managed to connect it to 2 other TV’s by the aerial connection to the one in the kitchen, and a video sender to the TV in the bedroom ! I miss having the TV in the kitchen, as I spend so much time there ! Any help greatly appreciated
See
https://myhumax.org/forum/topic/replacing-sky-with-1100s-troubles#post-44211
- You must be logged in to reply to this topic.