Help with broken up & noisy channel 5 recordings

Forum Forums Freeview HD FVP 4000T, 5000T Help with broken up & noisy channel 5 recordings

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #22540
    Anonymous
    Inactive

    My wife likes to have Neighbours and Home and Away recorded each afternoon on Channel 5 so she can watch them later but recently the recordings have been near unwatchable with noisy horizontal streaks. I'm not aware of issues with any other channels. I've tried fiddling with the cables and retuning the Humax (which is an FVP400T with the HD about 75% full) but it made no difference. The signal test looks ok showing Tuner 1 (channel 27) with 79% strength and 100% Quality. We are South Coast, near Bournemouth. Should Tuner 2 and Tuner 3 be populated? Any expert advice would be much appreciated please?

    I'd love to be able to resolve this for her.

    [attachment=95601,2172]

    #109678
    Anonymous
    Inactive

    Tuners 2 & 3 will only show something if you are recording two programmes which are not on the same Mux as the one you are watching. Eg. watching Ch5 HD, recording Ch4 SD and BBC1 SD.

    #109679
    Anonymous
    Inactive

    Thank you. I believe the issue is with Channel 5 SD, apologies if the screen shot is for Channel 5 HD, the strength and quality are similar.

    #109680
    Martin Liddle
    Participant

    JeremyClarke – 24 mins ago  » 

    Thank you. I believe the issue is with Channel 5 SD, apologies if the screen shot is for Channel 5 HD, the strength and quality are similar.

    The screenshot is channel 5 SD. The signal strength and quality appear fine. I am guessing that the most likely cause might be interference; first thing to check is that the HDMI cable and the aerial cable are kept as apart as possible.

    #109681
    Anonymous
    Inactive

    Martin Liddle – 39 mins ago  » 

    JeremyClarke – 24 mins ago  » 

    Thank you. I believe the issue is with Channel 5 SD, apologies if the screen shot is for Channel 5 HD, the strength and quality are similar.

    The screenshot is channel 5 SD. The signal strength and quality appear fine. I am guessing that the most likely cause might be interference; first thing to check is that the HDMI cable and the aerial cable are kept as apart as possible.

    Thanks, will check that tomorrow and report back!!!!

    #109682
    Anonymous
    Inactive

    JeremyClarke – 3 hours ago  » 

    Thank you. I believe the issue is with Channel 5 SD, apologies if the screen shot is for Channel 5 HD, the strength and quality are similar.

    To clarify, assuming you are using the Rowridge transmitter on IoW (as it seems from the UHF Ch numbers mentioned), Ch5 SD (along with ITV, Ch4 and a few others) should show 27 as the UHF channel on the signal test. Ch5 HD should, as with BBC1 HD, ITV HD etc. show Ch 21.

    Your image seems to show Ch 27 (the SD version).

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.

The inner genius!