HDFOX-T2 won't standby

Forum Forums Freeview HD HD FOX T2 HDFOX-T2 won't standby

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13055
    Anonymous
    Inactive

    Here’s an interesting experience that might help others:

    Last night when I swiched my HDFOX-T2 box to standby for the night, it shut down but immediately powered up again. It continued to do this each time I tried to go to standby. As it was getting late, I switched off at the mains and went to bed.

    This morning, it was exactly the same, so I disconnected the Seagate 500G portable external drive. The problem was still there so I did a factory reset. Problem solved!

    However, on reconnecting the drive, the problem came back. Looking at the recorded programmes, some of the folders and files were missing, so I assumed that the disc had corrupted and did a reformat (using the box). All now seems to be well, but it will be interesting to see how long it lasts!

    #31297
    Anonymous
    Inactive

    Following up this post, I had subsequent troubles and so ran Seagate’s tool, which detected loads of errors. Seagate replaced the HDD (with a 750GB model!) and I have had no further problems since.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

The inner genius!