Topic: FVP 5000T volume after standby

Tagged: 5000T, volume

This topic has 8 replies, 5 voices, and was last updated 7 years, 10 months ago by Anonymous.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
January 21, 2018 at 12:36 pm #19592

Anonymous
Inactive

Hi all

So my new 5000T has an odd quirk in that whenever it turns back on from standby the volume is set to zero again, when I would expect it to remember the last setting. This is a pain as the audio outputs via RCA to an external amp which I control (along with the box) using a harmony remote.

Is this standard behaviour? What am I missing?

Thanks

January 21, 2018 at 12:39 pm #83803

grahamlthompson
Participant

Hi welcome to our forum. Do you have a power on timer set ?

January 21, 2018 at 2:28 pm #83804

Anonymous
Inactive

Hi Graham. Thanks for the speedy response.

Yes, as I understood that power on at 0700 and off at 0715 (or similar, I’m away from the box right now) helped keep the EPG up to date.

January 21, 2018 at 3:11 pm #83805

grahamlthompson
Participant

pollen – 39 minutes ago »

Hi Graham. Thanks for the speedy response.

Yes, as I understood that power on at 0700 and off at 0715 (or similar, I’m away from the box right now) helped keep the EPG up to date.

The power on timer has a setting for the box volume. If you haven’t set it to the same figure as you use for normal volume it will over-ride it.

Normally it’s best to keep the box volume at max and set the box HDMI digital audio out to stereo to avoid issues with HD channel audio.

January 21, 2018 at 9:01 pm #83806

Anonymous
Inactive

Good grief. Can’t believe I missed that in the settings. All done.

Thanks again.

January 22, 2018 at 10:16 am #83807

grahamlthompson
Participant

pollen – 13 hours ago »

Good grief. Can’t believe I missed that in the settings. All done.

Thanks again.

You are welcome

If only all issues were as easily solved

January 22, 2018 at 7:37 pm #83808

Anonymous
Inactive

I have set a power on timer for 8.00-08.15 but the start time keeps re-setting itself to 0.00. Is this a bug or am I doing something wrong?

EDIT: Tried setting it for 7.00-7.15 and it seems to have saved OK. Fingers crossed.

January 22, 2018 at 8:41 pm #83809

Barry
Moderator

scgf – 1 hour ago »

I have set a power on timer for 8.00-08.15 but the start time keeps re-setting itself to 0.00. Is this a bug or am I doing something wrong?

EDIT: Tried setting it for 7.00-7.15 and it seems to have saved OK. Fingers crossed.

A known issue reported during testing 8 and 9 are the problematic numbers.

January 22, 2018 at 9:46 pm #83810

Anonymous
Inactive

Barry – 1 hour ago »

scgf – 1 hour ago »

I have set a power on timer for 8.00-08.15 but the start time keeps re-setting itself to 0.00. Is this a bug or am I doing something wrong?

EDIT: Tried setting it for 7.00-7.15 and it seems to have saved OK. Fingers crossed.

A known issue reported during testing 8 and 9 are the problematic numbers.

Reminded of the old joke, why is 6 afraid of 7 …
Author

Posts