- This topic has 7 replies, 6 voices, and was last updated 5 years, 12 months ago by
.
-
Posts
-
Hi,
Because of a condition I have cannot have wifi and have an office upstairs wehre everything hardwired. Just bought the latest Humax 5000T as my old one of 10 years recording facility no longer worked. I only use it for recording purposes only and not wifi.
Did not realise it had wifi built in and need to disenable this. Am running this through the electric cables vs wifi. Can you disenable wifi from this Humax 5000T. Hopefully so. Many thanks Sally
Sally
samc – 17 hours ago »
Can you disenable wifi from this Humax 5000T.
To disable the Wi-Fi, it will first have to have Wi-Fi enabled!
Are you sure that someone has enabled Wi-Fi on your 5000T?
Is the 5000T second hand, or has someone connected it to Wi-Fi since you took ownership of it?
If someone has previously successfully activated the Wi-Fi (done by deliberately connecting it to Wi-Fi) then the network connection Wi-Fi sub-menu would show that a password has been stored. If so you will need to action a default setting. This won’t cause you to lose any recordings but you will need to set everything up again including the recording schedule.
Luke. Are you saying that the WiFi is switched OFF by default on a new box so if it hasn’t been specifically enabled, then Sally has nothing to worry about?
That’s how it reads to me.
Surely, if an active ethernet cable is plugged in, the wifi will be automatically disabled?
Assuming Sally’s home has no WiFi installed, as a result of her needs, then surely the 5000T’s WiFi will not be active. So no problem to solve.
A1944 – 32 mins ago »
Assuming Sally’s home has no WiFi installed, as a result of her needs, then surely the 5000T’s WiFi will not be active. So no problem to solve.
If someone has activated the Wi-Fi by giving it a password for an SSID then I’d expect it to automatically poll for a connection.
It may give up after a few minutes or perhaps it might not, or perhaps somewhere in-between, but I’d expect it to poll for at least a short period when ever it is switched out of stand-by.
Trev – 1 hour ago »
Luke. Are you saying that the WiFi is switched OFF by default on a new box so if it hasn’t been specifically enabled, then Sally has nothing to worry about?
That’s how it reads to me.
Yes.
SSThing – 1 hour ago »
Surely, if an active ethernet cable is plugged in, the wifi will be automatically disabled?
Not necessarily “surely”, (I know this is Linux but think what some versions of Windows prefer as a default!), but at least a couple of older posts have stated the Ethernet is being used by the Humax FVP in preference to Wi-Fi, and so yes you are correct. However, Sally has said:
I only use it for recording purposes only
which implies that there may not be a live Ethernet cable always attached to override the 5000T attempting to use Wi-Fi to communicate.
Luke – 2 hours ago »
A1944 – 32 mins ago »
Assuming Sally’s home has no WiFi installed, as a result of her needs, then surely the 5000T’s WiFi will not be active. So no problem to solve.
If someone has activated the Wi-Fi by giving it a password for an SSID then I’d expect it to automatically poll for a connection.
It may give up after a few minutes or perhaps it might not, or perhaps somewhere in-between, but I’d expect it to poll for at least a short period when ever it is switched out of stand-by.
Re-reading the original post, it sounds as if Sally has bought a new and unused 5000T, in which case no password would have previously been set.
samc – 22 hours ago »
Am running this through the electric cables vs wifi.
When you say you are running it through the electric cables, I take it that you are using Powerline or Homeplug adapters? Are you aware that these also emit electromagnetic radiation; ask a radio amateur? See for instance https://en.geovital.com/ethernet-over-power-line-eop-powerline-powerlan-and-health-effects/ If these frequencies are an issue for your health then it would be advisable to use a network cable. Flat network cables are available that are relatively easy to hide under the carpet.
- You must be logged in to reply to this topic.