- This topic has 5 replies, 2 voices, and was last updated 10 years, 7 months ago by
.
-
Posts
-
I noticed recently having had no previous trouble at all with my Foxsat HDR that one of my local channels has changed of its own accord. I live in the Granada area so always have had the local granada reports news programme, switching on last week i noticed i now recieve the london equivalent, why would this automatically change? I note i also recieve BBC1 London, every other regional channel is fine, its not a big deal to be fair but i was wondering if i just do a freesat retune is it possible i could lose some of the smaller channels i already have? I have retuned previously and i found a couple of new channels but lost a couple of others, i watch a few programmes on Tru tv for example so not wanting to lose this channel im reluctant to do a re scan, ive checked for updates but none are available im all up to date, so what would cause the programme change? Many Thanks for any info.
Just do a freesat re-tune using a Manchester postcode. (Make a note of your recording schedule as you will have to re-enter it). Tru TV should be on your list provided your dish doesn’t have a alignment issue.
All the BBC Regions are available on channels 950-973.
Before you re-tune check your signal on Tru TV as follows
Menu – Setup – Manual Tune
Press right on transponder – All – Press OK
Scroll down the list to 12551 V 22000 5/6 – press OK
(If this transponder is not in the list – see the last paragraph in this post)
Look at the strength and quality at the bottom (mine is 90% Signal 100% Quality). Provided the quality is in the right hand green band a freesat tune should find it.
Press Exit to get out of the manual tune option.
Only reason I can think of is that the channels allocated to your postcode have been changed. You do leave the Foxsat-hdr in sby overnight ? If not the channel database will get out of date so channels moving transponder will not work.
Great info there thanks very much, yes i leave the box on standby overnight its never unplugged, thanks again.
Well ive tried to do a re-scan and appear to have found a problem, ive done scans before but now when i press menu-setup theres no options to do a tune, all that comes up is tv scart, vcr scart, audio, dolby digital, lip-sync, screen ratio, display format, and hdcp default, i referred to the user manual and it states menu-setup-manual tune but that option isnt there, on the left of the screen there are four icons for settings, edit channels and system but the third icon a satellite dish does not function when scrolling down that particular option isnt available so dont know if thats a problem, strange the freesat scan and manual scan options seemed to have disappeared and im in the right place, menu-then settings, probably best to leave well alone.
bellevueace – 9 minutes ago »
Well ive tried to do a re-scan and appear to have found a problem, ive done scans before but now when i press menu-setup theres no options to do a tune, all that comes up is tv scart, vcr scart, audio, dolby digital, lip-sync, screen ratio, display format, and hdcp default, i referred to the user manual and it states menu-setup-manual tune but that option isnt there, on the left of the screen there are four icons for settings, edit channels and system but the third icon a satellite dish does not function when scrolling down that particular option isnt available so dont know if thats a problem, strange the freesat scan and manual scan options seemed to have disappeared and im in the right place, menu-then settings, probably best to leave well alone.
Was your box recording (or about to start a recording in the next 15 minutes). For obvious reasons you can’t retune during a recording or during the pre 15 minute check for a Accurate Recording start signal. As you previously managed to select the manual tune option this would seem to be the obvious reason.
Yes you were right after recording i followed your instructions and it all worked ok, after checking the transponder the signal and quality was 80% in the green so hopefully the channels i want should be found, once again thanks for your help.
- You must be logged in to reply to this topic.