Forum › Forums › Freeview HD › FVP 4000T, 5000T › Catchup doesn't work on HD channels
- This topic has 4 replies, 3 voices, and was last updated 9 years, 4 months ago by
Anonymous.
-
AuthorPosts
-
July 29, 2016 at 12:19 pm #18173
Anonymous
InactiveI have noticed that if I press guide then go back to catchup there aren’t any available programs for channel4 HD or itv1hd. I have to press 4 or 3 to go to the SD channels to find the available programs. I have noticed that this receiver was reviewed last year online and this was said to be a firmware fault 8-9 months ago.
July 29, 2016 at 12:25 pm #72226grahamlthompson
ParticipantThat’s because only the BBC have HD catch up content. All the rest are SD only so only link to the SD epg content.
July 29, 2016 at 12:33 pm #72227Anonymous
InactiveIf you tune into a SD channel when there is a HD version of the same channel the receiver says press OK to watch in HD. So why can’t you adjust the firmware so that the SD channel 4 available catchup comes up in the HD section channel 104. It doesn’t matter if it plays back in HD or SD as long as the play icon is there in the HD section of the guide.
July 29, 2016 at 12:39 pm #72228grahamlthompson
ParticipantPhil1 – 1 minute ago »
If you tune into a SD channel when there is a HD version of the same channel the receiver says press OK to watch in HD. So why can’t you adjust the firmware so that the SD channel 4 available catchup comes up in the HD section channel 104. It doesn’t matter if it plays back in HD or SD as long as the play icon is there in the HD section of the guide.
Suspect you would have to ask Freeview or the specific broadcaster that. There is a big difference between the data transmitted on the live epg which is designed to be capable of the SD/HD link with the IP data for the catch up content. It’s the same on the satellite Freetime boxes.
I don’t have the box but at a guess tapping the appropriate SD channel number while in the epg (eg 3 for ITV) before pressing left will work.
July 29, 2016 at 1:02 pm #72229Anonymous
InactivePhil1 – 10 minutes ago »
So why can’t you adjust the firmware so that the SD channel 4 available catchup comes up in the HD section channel 104. It doesn’t matter if it plays back in HD or SD as long as the play icon is there in the HD section of the guide.
The youview boxes do what you are suggesting. Not that I would recommend a youview box.
The FVP design decision does look a bit weird especially as the quality of catch-up will never exactly match either the SD or the HD channel even if both have HD in their name, or both don’t have HD in their name.
With the recent change of BBC iPlayer HD on TVs from 1280×720 to 960×540 perhaps the catchup option not even be against the HD channel anymore.
(joking, but not about the resolution as that is true)
-
AuthorPosts
- You must be logged in to reply to this topic.