- This topic has 3 replies, 2 voices, and was last updated 14 years, 4 months ago by
.
-
Posts
-
My Humax and TV have worked fine til a few months back when BBC started breaking up (have had advice re this subsequently). However, I tried to find the “fine tuner” which I remember from before, and think I must have pressed something wrong in one of the menus (setting prefs?) – now I can see that the channels and menu are working on the Humax via its own front display, but nothing is showing on the TV screen. I selected channel 6 on TV as normal but it is just snow with “no signal” diplayed. Of course because it isn’t displaying the Humax I can’t use the Humax menu to try and rest anything. Entirelely my fault I am sure – but any ideas as to either what I have done or how to reset it it so the TV displays the Humax? I have checked that everything is plugged in by the way. Thank you.
Welcome to the Forum
From your descriptive it sounds like you are connected via RF and have reset the box to default, and therefore the RF output channel has changed.
1. Can you connect via Scart or use the Composite outputs?
or
2. Retune the TV?
Oh thank you Barry – that sounds logical. I did look at the back and there isn’t anything in the Scart socket so it must be the other system. I will see if I have the Scart lead and try that – there should have been one with the box. I have tried to fiddle with the TV but will have another read of the TV manual to see if I can do anything that way now I know I am looking for RF output. I am not quite sure what I am doing as you may gather! and am very grateful for your help.
- You must be logged in to reply to this topic.