DTR T1010 Picture

Forum › Forums › Freeview HD › YouView DTR-T › DTR T1010 Picture

Tagged: 

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • September 13, 2014 at 1:00 pm #16051
    Anonymous
    Inactive

    Can someone please help by telling me how I can adjust the picture width (mode) on the 1000s. As things stand at the moment, the picture is so wide, the Guide channels are left off the screen. I have tried to change the width, but its either too wide or only shows half a screen.

    Is there something I am missing, perhaps?

    Any suggestions gratfully received.

    September 13, 2014 at 2:05 pm #54673
    Anonymous
    Inactive

    The picture settings as well as matching your physical TV must also match the TV settings.

    Normally you set the HDR-1000S screen-ratio to 16:9 (If that is what it is physically, also called wide-screen) and the display-format to Auto. It will then pass the picture to your TV that will process the picture according to it’s settings, which is what you could have set incorrectly.

    September 16, 2014 at 1:26 pm #54674
    Anonymous
    Inactive

    Hi REPASSAC

    Many thanks for coming back. I obviously had a brainstorm when I wrote the question as I should have put HDR 1010, not 1000s. My apologies for wasting your time

    September 16, 2014 at 1:33 pm #54675
    grahamlthompson
    Participant

    poppey – 2 minutes ago  » 

    Hi REPASSAC

    Many thanks for coming back. I obviously had a brainstorm when I wrote the question as I should have put HDR 1010, not 1000s. My apologies for wasting your time

    Essentially an identical box. Other than being White and having built in WiFi it’s functionally the same box. Do you by any chance mean the Youview box like this one (Note the DTR rather than HDR)

    http://www.humaxdigital.com/uk/products/product.php?gid=183

    This is the HDR1010S

    http://www.humaxdigital.com/uk/products/product.php?gid=369

    September 16, 2014 at 1:52 pm #54676
    Anonymous
    Inactive

    You are right Graham, on checking, it is indeed DTR 1010.

    September 16, 2014 at 2:13 pm #54677
    Anonymous
    Inactive

    Don’t know the unit but I would guess the advice would be exactly the same. They all use much the same logic.

    September 16, 2014 at 2:24 pm #54678
    Barry
    Moderator

    The DTR T1010 is a YouView unit.

    There are no adjustments for aspect ratio setting on this unit, so you need to check your TV settings.

    September 17, 2014 at 2:58 pm #54679
    Anonymous
    Inactive

    Thank you Barry. I did try adjusting TV, but wasn’t very successful.

    Thanks again for letting me know.

    September 17, 2014 at 3:09 pm #54680
    Anonymous
    Inactive

    If you post the TV make and model, someone might be able to advise.

    September 19, 2014 at 7:11 pm #54681
    Anonymous
    Inactive

    Thanks everyone. Managed to get someone to look at TV in end as it kept on reverting the picture to 4.3. All OK now.

    Thanks for all your suggestions.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.

The inner genius!