Forum › Forums › Freeview HD › HDR FOX T2 › Not pausing/recording or able to acess planner
Tagged: Media button not working
- This topic has 7 replies, 3 voices, and was last updated 11 years, 7 months ago by
Barry.
-
AuthorPosts
-
April 21, 2014 at 10:26 am #15673
Anonymous
InactiveHi,
Can someone please help with my issue. I am unable to access the media button, pause live TV or record anything. I am still able to use the TV guide but when I select media button nothing happens, however when I hit the pause/rewind/forward button a circle with a diagonal line through it appears in the top left of the screen. I have tried various firmware changes using an USB pen.
I have done a factory restore with no changes.
April 21, 2014 at 10:39 am #52139Martin Liddle
Participantbluerreyes – 10 minutes ago »
Can someone please help with my issue. I am unable to access the media button, pause live TV or record anything. I am still able to use the TV guide but when I select media button nothing happens, however when I hit the pause/rewind/forward button a circle with a diagonal line through it appears in the top left of the screen.
I would guess the hard drive has either died or the file system has gone read only. First thing to try would be the hard disk test and see what that says. Your options after that are to install the custom firmware and run fix-disk or to try and format the drive.
April 21, 2014 at 10:44 am #52140Anonymous
InactiveHi Martin,
Thanks for quick response. Could you advise how I do Hard disk test and if necessary the custom firmware run fix-disk?
April 21, 2014 at 10:53 am #52141Martin Liddle
Participantbluerreyes – 4 minutes ago »
Thanks for quick response. Could you advise how I do Hard disk test and if necessary the custom firmware run fix-disk?
Hard disk test: Menu button>Settings>System>Data Storage>HDD Test
Custom firmware: start at http://wiki.hummy.tv/wiki/Custom_Firmware_Overview
April 21, 2014 at 11:00 am #52142Anonymous
InactiveUnable to access data storage it is greyed out on the menu screen. Any ideas?
April 21, 2014 at 12:28 pm #52143Martin Liddle
Participantbluerreyes – 1 hour ago »
Unable to access data storage it is greyed out on the menu screen.
Put the box into standby, wait until you hear the disk stop spinning (can take a minute or so), turn off at the mains, wait two minutes, then turn on box and bring out of standby. If it is still greyed out then I would be inclined to think the hard drive has died. Is the box still under warranty (two years if registered with Humax)?
April 22, 2014 at 7:38 am #52144Anonymous
InactiveHi Martin,
I did as instructed above and it is still greyed out. I will contact Humax today hopefully get somewhere with them.
Thanks for your help.
April 22, 2014 at 9:24 am #52145Barry
ModeratorContacting Humax is your only recourse, Martin’s suggestion(s) would usually give you access to menus.
-
AuthorPosts
- You must be logged in to reply to this topic.