Forum Replies Created
-
Posts
-
To add to Martins response…
Watch BBC News HD
You can check signal strength/quality via:
Settings
Channel Settings
Signal Test
No idea Martin. I had no previous knowledge that this was even planned.
Never witnessed the issue on either 1800 or 2000T connected to Sony TV,
With thanks to member NorthPole who spotted on his HDR 2000T…
There appears to be a new software version to fix HDMI sound issues:
https://uk.humaxdigital.com/support/?category_id=12&product_id=1185&curr_page=sw_release
Release note:
HDMI No Sound Issue is fixed.
I’ve had no info from Humax Towers but it appears that there is new software for the 1800 and 2000T
Version as you have indicated 1.01.20
Release note:
HDMI No Sound Issue is fixed.
https://uk.humaxdigital.com/support/?category_id=12&product_id=794&curr_page=sw_release
Above is no longer valid…
FVP 4000T updated to same UI as FVP 5000T with software version 1.03.39 made available 20/02/2018
Above is no longer valid…
FVP 4000T updated to same UI as FVP 5000T with software version 1.03.39 made available 20/02/2018
You can see what the differences were between the 4000 and 5000T vis this FAQ:
https://myhumax.org/forum/topic/current-differences-between-fvp-4000t-and-5000t
If you miss out on the IP download which I believe is a phased roll out, then you can download from Humax Support site for USB upload:
J_Oz – 2 minutes ago »
Mine (4000) got updated overnight.
Unfortunately some of the functionality has been removed.
When you press the OK button you get some information about what is on the current channel, and you can select ‘blue’ to see the channel list. What you can no longer do is find out what is on later either on the current channel or any others, although you can see what is currently being broadcast on these. It’s the right arrow functionality that is missing.
OK, right on current channel works for me.
Luddym – 12 minutes ago »
I’ve been using the 5000t software on my 4000t.
The update downloaded ok (over Lan) but when it rebooted to install the update the screen went black and my TV reported “no signal” for almost 5 minutes.
Panicking, I pressed both power off buttons on the remote as I wasn’t going to unplug the item after so short a time. After turning the TV back on the update was starting to install. I have CEC off.
Similar issue when I tested the 5000T software on 4000T unit, reverting back to 4000T software resulted in same as yourself, power cycle of unit worked for me.
SSThing – 1 hour ago »
Ps. Trying to open the link to this thread opens up the other thread, hence my double post. To get here I had to click on “read latest by RogerB”.
Pps. Now I have posted here the link works correctly, strange.
I Had same problem, logging out and back in fixed for me, slight database glitch methinks.
Del2701 – 3 hours ago »
I take back the suggestion above (Humax are selling units that cannot do what advertised.) My mistake, got it working fine now. I had Humax before and rate them, thats why I bought one again.Thanks for your replies.
Thank you for updating us, glad it is now working.
