- This topic has 5 replies, 2 voices, and was last updated 10 years ago by
.
-
Posts
-
I recently purchased the hdr1100s and connected 1 sat cable. Now I have connected a 2nd cable but can’t find anyway to change the setting from 1 to 2, any ideas please
Just do a factory reset. You will need to make a note of your recording schedule (or photograph it with a digital camera), as you wil need to re-enter them. Before you ask it will not affect your existing recordings.
The number of cables is detected during setup, there is a hidden menu to change this but it’s easier to do the reset.
Welcome to our forum.
Thank you. When I looked at the factory reset, before I came on here it asked me for a pin number, which I didn’t have, but since I found there is a default ‘0000’ so I’ll try that shortly
Bowler76 – 53 seconds ago »
Thank you. When I looked at the factory reset, before I came on here it asked me for a pin number, which I didn’t have, but since I found there is a default ‘0000’ so I’ll try that shortly
0000 is default pin on all Humax boxes since the year dot
Thanks First Humax but quite like it.
Thank you, up and running now.
- You must be logged in to reply to this topic.