- This topic has 147 replies, 50 voices, and was last updated 13 years, 3 months ago by
.
-
Posts
-
A bit more news. AV2HDR opens the non-freesat recordings now as does AV2HDR-T2. You can now record the HD streams on a Foxsat-hdr using non-freesat and watch them on a HD (HDR) FOX T2
I’m a tad confused as my box is still not recording and it says there is no software to update what do I do now?
What firmware version does it say is installed?
I’ll retract that comment for now. I had to go out just after finding out about this so did the obvious and restarted it and set it to record a random chunk of beach volleyball before heading out the door. Happily appears to be doing it now on getting home
As long as I can sort it in time for the trampolining I’ll be happy
I am now running Raydon’s software on 3 boxes and have set the EPG to display all and only SD channels. Two boxes have the Olympic SD channels as 5001-5024, the other at 53xx – 54xx after a retune. Don’t undestand why!
However, when I select an event in the Olympic channels in the EPG and press ‘record’, I get a timer signal up – but I also get timer symbols in ALL other channels with events at the same time. This also happens if I select an event then press ‘OK’, which gives me a ‘Record’ or ‘Watch’ option and I select ‘Record’.
Any thoughts/ideas as to what is happening?
You can stop a box from taking the OTA update – just make sure auto standby is disabled and leave it on all the time!
Leaving it on all the time can lead to other problems.
The channel numbers are generated by the box in non-freesat mode, depending on what channels you already have stored (The data doesn’t have lcn channel numbers, these come from the epg). The one with the higher numbers must have had some other channels already stored. (You can edit them manually if you wish)
While playing with recording the SD channels I noticed the same but the correct stream actually recorded. You have to convert these to manual recordings (I edited the start to 1 minute early) in order for the box to survive a re-boot. Alternatively use the provided manual recording option for non-freesat channels.
While playing with recording the SD channels I noticed the same but the correct stream actually recorded. You have to convert these to manual recordings (I edited the start to 1 minute early) in order for the box to survive a re-boot. Alternatively use the provided manual recording option for non-freesat channels.
Thanks Graham – will try a timer recording to see what happens now.
When I tried last week, it came up with a ‘recording conflict’ message and I had to delete the one I didn’t want.
bellringer65 – 30 minutes ago »
While playing with recording the SD channels I noticed the same but the correct stream actually recorded. You have to convert these to manual recordings (I edited the start to 1 minute early) in order for the box to survive a re-boot. Alternatively use the provided manual recording option for non-freesat channels.
Thanks Graham – will try a timer recording to see what happens now.
When I tried last week, it came up with a ‘recording conflict’ message and I had to delete the one I didn’t want.
Now getting same as you, going to try via the webif.
EDIT same on webif, it looks as if all streams on same transponder are treated as one programme. So presumably you can only record 2 if they are on different transponders (I only added one to Non-freesat). Recording one HD and one SD should be OK.
Now able to record the channels – found this on what hifi site http://www.whathifi.com/news/humax-freesat-boxes-wont-make-the-most-of-the-olympicsa
Recording going fine at moment
If your machine hasn’t already updated (will do if left switched on) – do aas it suggests in this link. Now off to enjoy my olympic recordings – nice talking to you all
musicmama – 23 minutes ago »
Now able to record the channels – found this on what hifi site http://www.whathifi.com/news/humax-freesat-boxes-wont-make-the-most-of-the-olympicsa
Recording going fine at moment
If your machine hasn’t already updated (will do if left switched on) – do aas it suggests in this link. Now off to enjoy my olympic recordings – nice talking to you all The poster is trying to record the SD streams not the HD ones. A Humax ota from Monday afternoon fixed the HD recording capability for everyone.
I have read a lot of messages regarding OLympics channels. My problem is with a Freesat HD which shows No or bad signal on Olympics 1 & 2. Is this being addressed?
Is it just 1 & 2 – no problems with any other channel (olympics or not), If not I would suggest a freesat tune.
Yes, just Olympics 1 & 2. Ken
Is it just me – I’ve read all about not being able to record Olypic channels but I can’t even see them! I get the message about “receiving programme information” but nothing shows!!!
- You must be logged in to reply to this topic.