- This topic has 146 replies, 35 voices, and was last updated 8 months ago by
.
-
Posts
-
Mars – 1 week ago »
Yes, you will have to setup a hotspot on your phone then connect the Aura to the WiFi hotspot.
If you take it home then you will have to connect to a TV to setup WiFi and to see what is happening.
I’ll have to do it too, I;m getting the same
trog – 2 mnths ago »
I emailed Humax and asked if we were still going to get an update as many people no longer have this issue or was it just hot air and they responded with………..
Thank you for contacting Humax.
We’re writing to inform you that in response to recent beta testing results, we have initiated the software update process for the “Freeview” app across ALL Aura units currently in the field.
The update is being rolled out automatically to all boxes as users continue to use their devices normally.
However, if you find that your unit still retains the old version of the app, we kindly ask you to follow the steps outlined below for a manual update:
Turn on your set-top box and watch live TV for 1 minute.
Place the set-top box into standby mode for 1 minute.
Turn on your set-top box again and watch live TV for 5 minutes.
Place the set-top box into standby mode once more, this time for 2 minutes.
Check the version name in Settings > Apps > See all apps > Show system apps > “Freeview”
(Please note: This should not be confused with Freeview TV, which should display as “1.00_62_240210”).
We sincerely appreciate your patience and understanding during these days of inconvenience. Our team is committed to ensuring that you have a seamless experience with the Freeview app moving forward. If you encounter any issues or require further assistance, please do not hesitate to reach out to us.
Thank you for your continued support.
Best Regards,
Judit
Humax Customer Support
Can you register the aura online ?
Mand123 – 1 week ago »
trog – 1 hour ago »
Mand123 – 17 mins ago »
Mars – 48 mins ago »
Yes, you will have to setup a hotspot on your phone then connect the Aura to the WiFi hotspot.
If you take it home then you will have to connect to a TV to setup WiFi and to see what is happening.
The new update is 1.00_62_240210. Just follow this and it should say that version number…………..
Check the version name in Settings > Apps > See all apps > Show system apps > “Freeview” If it does not show that number then try the method on page 7.
It seems to have done an update now as pressed live tv and came up with some dialogue box’s and last one mentioned bug fixed. Fingers crossed, time will tell and if not I’ll follow that procedure.
I’ll check the version number when I’m there next.
Thank you so much for your time and help
How are you getting on with this Mand as I’m going to have to firstly try using a hotspot too ?
After a bit of poking around I came across this post by Barry Senior Administrator.
https://myhumax.org/forum/topic/important-info-for-beta-testers-please-read?quote=89606
It mentioned a firmware update. in 2021, could this have a bearing on Beta Testers problems? I cannot remember what route I took though.
Barry’s posts around this time give a lot of info about the changes.
trog – 2 mnths ago »
I emailed Humax and asked if we were still going to get an update as many people no longer have this issue or was it just hot air and they responded with………..
Thank you for contacting Humax.
We’re writing to inform you that in response to recent beta testing results, we have initiated the software update process for the “Freeview” app across ALL Aura units currently in the field.
The update is being rolled out automatically to all boxes as users continue to use their devices normally.
However, if you find that your unit still retains the old version of the app, we kindly ask you to follow the steps outlined below for a manual update:
Turn on your set-top box and watch live TV for 1 minute.
Place the set-top box into standby mode for 1 minute.
Turn on your set-top box again and watch live TV for 5 minutes.
Place the set-top box into standby mode once more, this time for 2 minutes.
Check the version name in Settings > Apps > See all apps > Show system apps > “Freeview”
(Please note: This should not be confused with Freeview TV, which should display as “1.00_62_240210”).
We sincerely appreciate your patience and understanding during these days of inconvenience. Our team is committed to ensuring that you have a seamless experience with the Freeview app moving forward. If you encounter any issues or require further assistance, please do not hesitate to reach out to us.
Thank you for your continued support.
Best Regards,
Judit
Humax Customer Support
do you need to be connected to the internet to do this ? Sorry for asking, but I think I saw somewhere it was an alternative method to use if you didn’t have access ?
@Ne5 Of course you have to be connected to the internet to get any updates on an Aura. You may find once connected that the update loads without the need to do anything. Check to see if it has updated to 1.00_62_240210 by following the advice in your above post but if not then follow the long process that you have also posted above.
Thanks trog. I’ve now connected it to my phone hotspot. It’s a new Aura, so I haven’t registered it yet. Do I need to do this next ?
@Ne5 Not sure you need to but you should as it gives you a 2 year warranty with Humax when you do. Did you check if it had updated to 1.00_62_240210 when connected, you might have had a pop up saying it had updated though I did not on mine ?
Its 1.00_62_240210_6c584f1a4
Its 1.00_62_240210_6c584f1a4
Ne5 – 1 hour ago »
Its 1.00_62_240210_6c584f1a4
Thats the one, good. Has it sorted out your problems now? You should get your Aura online from time to time as there are bound to be things that change and update every now and again.
Seems to, so far.
I left the phone on hotspot last night and when my gf got up this morning she said she spent a few minutes agreeing to all sort of freeview things.
So hopefully it’s done and I don’t have to manually download anything.
Thank you and to everybody who has helped.
As this is the freeview app, does it mean when I connected to the hotspot, it was the FREEVIEW app that automatically updated, and not HUMAX ?
Ne5 – 39 mins ago »
As this is the freeview app, does it mean when I connected to the hotspot, it was the FREEVIEW app that automatically updated, and not HUMAX ?
I expect a few things may have updated if it had not been connected before, some including 1.00_62_240210 from Humax and some from other apps.
Ne5 – 5 hours ago »
As this is the freeview app, does it mean when I connected to the hotspot, it was the FREEVIEW app that automatically updated, and not HUMAX ?
My understanding is that the Freeview app is from Humax.
- You must be logged in to reply to this topic.