- This topic has 45 replies, 2 voices, and was last updated 5 years, 5 months ago by
.
-
Posts
-
Ok thanks
Evening Graham, got a new modulator all ok,so how do i find the uhf channel the humax is using. Also could i have one of your step by step guide how to connect it all up so as not to have to keep swapping the cables.
Many thanks Steve.
seasideman – 20 mins ago »
Evening Graham, got a new modulator all ok,so how do i find the uhf channel the humax is using. Also could i have one of your step by step guide how to connect it all up so as not to have to keep swapping the cables.
Many thanks Steve.
It may just work as it is
Connect up the new modulator as above. Connect the coax cable you removed from the Humax and connect it to the terminal on the new modulator marked rf in (you may need a adaptor).
If the two don’t interfere with each other than you don’t need to do anything else.
If they do simply increase the channel on the new modulator till you find one that allows the Humax to work properly.
Ok thanks will have a go in morning.
Afternoon, done that is it wise to have all this attached to a signal booster as one of the kids games comes out in black & white (colour on main tv) or would this interfere with modulator etc?
Steve
seasideman – 8 mins ago »
Afternoon, done that is it wise to have all this attached to a signal booster as one of the kids games comes out in black & white (colour on main tv) or would this interfere with modulator etc?
Steve
You might need a attenuator or simply fit a a aerial switch. If you unplug the humax input is the games in colour on the remote set. You could also try changing the new modulator channel. It might be affecting the chroma in the signal. A bit of experimentation is needed.
Thanks Graham, that will require a great deal of thought on my part due to my lack of know how. I will let you know in due course how it goes.
Many thanks for all your time and help it is most appreciated.
Steve
I just took all connections out of Humax still B&W (very strange).
seasideman – 19 mins ago »
I just took all connections out of Humax still B&W (very strange).
How do you know the games are in colour on the local TV without using the modulator how did you view them ?
I just plugged them in on the sockets at side of our jvc main tv changed to av ch. and they worked.
seasideman – 37 mins ago »
I just plugged them in on the sockets at side of our jvc main tv changed to av ch. and they worked.
Right I didn’t realise your main TV has AV in.
Try changing the new modulator 1 channel at a Time and retune the remote TV to the new channel.
On thing we know is the amplifier is not the issue.
Tried that no joy, so i have bought another game to see if that works will let you know.
seasideman – 2 hours ago »
Tried that no joy, so i have bought another game to see if that works will let you know.
Does the modulator have a switch that you can select PAL from. No colour suggests it’s not set to PAL. Perhaps contact the makers customer support.
Found the manual It is preset to UK PAL I so colour should be no problem.
https://www.blake-uk.com/downloads/pdfs/ins/PA2011-9036-02_(proMOD1_mK2).pdf
Thanks for checking that for me, the other game should arrive soon hopefully that will sort things out.
Thanks Steve
- You must be logged in to reply to this topic.