Forum › Forums › Freeview HD › Aura UHD › Humax Aura
Tagged: Aura, Humax Aura, IR codes
- This topic has 891 replies, 101 voices, and was last updated 4 years ago by
Anonymous.
-
AuthorPosts
-
November 16, 2020 at 11:13 pm #98926
Anonymous
InactiveMy iPlayer has gone again. Anyone else?
November 16, 2020 at 11:17 pm #98927Anonymous
InactiveJeddy3 – 3 mins ago »
My iPlayer has gone again. Anyone else?
False alarm. Did a long press Switch off and it’s back now. As you were.
November 17, 2020 at 9:18 am #98928grahamlthompson
ParticipantThis morning because there was nothing else on I could hear the the aura HDD was not running. I put it in long push sby late yesterday evening.
Started a stop watch when I pushed the remote power button. You can hear a very small sound as the HDD spins up if the room is very quiet.
Time to live TV 01:15.21
November 17, 2020 at 9:21 am #98929Anonymous
InactiveGet this message for 1 second when I switch it on
November 17, 2020 at 9:27 am #98930grahamlthompson
Participantkr002 – 5 mins ago »
Get this message for 1 second when I switch it on
What message ? KR002 is it in a pop up overlay. And were you starting from active or low power sby.
November 17, 2020 at 9:34 am #98931Anonymous
InactiveThis is the message –
The programme cannot be viewed via HDMI connection because your TV does not support digital content protection HDCP disconnect hdmi blah blah blah
November 17, 2020 at 9:37 am #98932Anonymous
InactiveI have a Sony HDTV 1080p no problems with former box Humax fox T2
November 17, 2020 at 9:39 am #98933grahamlthompson
Participantkr002 – 3 mins ago »
This is the message –
The programme cannot be viewed via HDMI connection because your TV does not support digital content protection HDCP disconnect hdmi blah blah blah
I get that sometimes as well. The Aura is quite slow at the hdcp handshake procedure. It’s nothing to worry about.
November 17, 2020 at 10:04 am #98934Anonymous
InactiveGood Morning Graham,
Just for clarity I first noticed this problem with my Aura
My highest channel in the EPG is 795, manually tuned .( served by Crystal Palace, Bluebell Hill, Dover, and Sudbury via ‘Rouncefall my transmitter of choice’ ).
This problem arose becauce my original choice was ITV HD 103, when I clicked on the EPG the record option only gave ‘Record’ no series link. I then checked in the following days EPG no recording flags were visable. I then set indvidual days, some presented series Links !. I checked my freesat Fox Sat HDR. The same problem was seen in the EPG no record flag present for subsequent days. On further investigation it would appear that due my postcode I have
ITV HD Meridian ITV SD London
BBC 1 HD London BBC 1 SD east (east)
In a post elsewhere a mention was made of broken series links after the ITV swop on freesat.
November 17, 2020 at 10:50 am #98935grahamlthompson
ParticipantFixdit – 37 mins ago »
Good Morning Graham,
Just for clarity I first noticed this problem with my Aura
My highest channel in the EPG is 795, manually tuned .( served by Crystal Palace, Bluebell Hill, Dover, and Sudbury via ‘Rouncefall my transmitter of choice’ ).
This problem arose becauce my original choice was ITV HD 103, when I clicked on the EPG the record option only gave ‘Record’ no series link. I then checked in the following days EPG no recording flags were visable. I then set indvidual days, some presented series Links !. I checked my freesat Fox Sat HDR. The same problem was seen in the EPG no record flag present for subsequent days. On further investigation it would appear that due my postcode I have
ITV HD Meridian ITV SD London
BBC 1 HD London BBC 1 SD east (east)
In a post elsewhere a mention was made of broken series links after the ITV swop on freesat.
Are you saying you have manually tuned channels from more than 1 transmitter ?
If so in common with all Humax Freeview-HD kit it screws up recordings set from the epg. Series linking fine for me on both a HDR-1000S and a Foxsat-HDR.
Freesat does not have this issue. In fact all the BBC channels HD and SD appear in the epg. This does sometime cause issues generating multiple recordings.
eg if BBC1 Scotland – HD happens to be showing a different episode to BBC1-HD england it generates two recording reservation if you already have one scheduled in this time slot you get a clash message because the boxes have a limit of 2 simultaneous recordings. The aura of course can record 4 at the same time subject to mux.
If you delete any channels not from your preferred transmitter I guess it will work OK.
November 17, 2020 at 12:49 pm #98936Anonymous
InactiveThank you Graham, but all muxes are tuned to Sudbury’s SNF Transmitter at Rouncefall.
In the Freeview EPG it shows 103 ITV HD Meridian this is correct apparently
Though why I need Brighton’s local news is beyond me.
I have checked all EPG’s and SCHEDULES today and all are correct ! One of Life’s mystery’s
Perhaps over night house keeping?
November 17, 2020 at 1:09 pm #98937grahamlthompson
ParticipantFixdit – 17 mins ago »
Thank you Graham, but all muxes are tuned to Sudbury’s SNF Transmitter at Rouncefall.
In the Freeview EPG it shows 103 ITV HD Meridian this is correct apparently
Though why I need Brighton’s local news is beyond me.
I have checked all EPG’s and SCHEDULES today and all are correct ! One of Life’s mystery’s
Perhaps over night house keeping?
You might have had a software update.
What application Version and Date do you have in Freeview Play Preferences – System ?
November 17, 2020 at 5:51 pm #98938Anonymous
InactiveApplication version 1.00_25_201029_0a7a47a
Update date Oct 29,2020 11:06:43 am
Does not seemed to have changed.
November 17, 2020 at 6:53 pm #98939grahamlthompson
ParticipantFixdit – 58 mins ago »
Application version 1.00_25_201029_0a7a47a
Update date Oct 29,2020 11:06:43 am
Does not seemed to have changed.
Did you have a note of what is was before ?
It’s entirely possible it has changed.
I have posted this in another thread. Member Brian had a brilliant idea.
Although not announced a new update resets your preferences to defaults.
One of the defaults easily visible is how bright the front led is.
Default is 60%. Change it in settings to 20%. also ideal if your box is say under the TV.
A new software update resets it back to 60%. If you have a new software update it will revert to the much brighter 60%.
Now check what application version and date you have
November 17, 2020 at 7:01 pm #98940Anonymous
InactiveHeard anymore when the aura app is coming?
Also how do you use VLC to watch recordings on other devices?
Thanks
-
AuthorPosts
- You must be logged in to reply to this topic.