- This topic has 24 replies, 4 voices, and was last updated 7 years ago by
.
-
Posts
-
norbellini – 2 hours ago »
one router netgear dg834g
Any WiFi extenders or similar?
Aye,do you know there is one I will try that tomoro
not the wifi extender I reckon next step reset router thanks
Did you check the WiFi extender is configured correctly as an extender and not as a router.
Something is active on 192.168.0.1 the 3ms response time does not seem like a cable connection see my <1ms response time.
If you reset the router un-power the extender first until the router boot is finished and finally repower the Humax and post the Humax network info.
ok
“Something is active on 192.168.0.1 the 3ms response time does not seem like a cable connection see my <1ms response time.”
when i posted the ping results it was as a wifi signal from my netbook
not via cable I dont know if that makes a difference I havnt a clue have i thanks
REPASSAC – 2 hours ago »
Something is active on 192.168.0.1 the 3ms response time does not seem like a cable connection see my <1ms response time.
Surely it IS the router on 192.168.0.1. The puzzle is where did the 192.0.2.100 (post #5) IP address come from?
SORTED
I took out the wifi extender and reset router to factory settings and we have a wifi connection on the humax only thing is ON DEMAND IS NOT AVAILABLE ,is that what you can get
thanks for all your help chaps you sure no what your talking about
On demand back on after further reset all good
My guess is that the WiFi extender is a multifunction device that was in router mode rather than extender mode.
If you use the extender again check the manual.
- You must be logged in to reply to this topic.