Updated successfully too.

First time after reboot, when going into the home screen with the picture-in-picture active, it was having problems with the smaller live TV picture (kept rapidly resizing it between the full small box and one with a white border frame between the box edge and the image edge).

Went into the menus though and came back to the top level home page again and the PIP was then at the correct and stable full size of its little box.

Since update, I’ve noticed that when playing certain video files on kodi, my LG TV is detecting (hdr content) HDMI ULTRA HD Deep Color, and prompting me to restart the tv. But on restart the picture is flickering, and flashing.

I have an identical setup connected to the TV and is working fine

Audio passthrough works well under Plex, a welcome fix!.

I can’t for some reason perform an automatic channel search.

It asks for the password, I type 0000, then goes back to the menu.

I also tried disabling ‘pin on lock channel settings’, typed 0000, but goes back to the menu without disabling pin on lock channel settings.

Change password does the same thing.

I think something is broken.

phlppip – 13 hours ago  » 

When on the home page or guide when I press a button to move to a different part of the screen eg different Chanel on the guide the screen flickers each time, this is now very annoying.

I’m guessing that no one else had this issue then, however it appears that this morning after the box has been in deep standby overnight it has rectified itself and no longer flashes all very odd.

Mars – 10 mins ago  » 

I switched off Red LED in Deep Standby, which is set from 11:30 to 7:30, but this morning at 7:10 the red led was on. Switched the Aura on (it was in deep standby) and checked the setting. Then, I put the box back into deep standby and the red led went off after a minute or two.

Some improvements seem to have been made for DVB-T2, but I have always found these channels to be robust and have more issues with DVB-T channels where signal quality varies wildly at times (although it is usually 100%). This seems to be quite a common issue and is not solved by a variable attenuator so ignore the snakeoil salesmen.

Regarding choosing a region after automatic retunes, I still have channels in the 800s.

I have re-tuned twice bit have not had the option to select region which is a shame as I’m in Cambs however for local ITV news I get Meridian covering Kent and Sussex for some odd reason

phlppip – 1 hour ago  » 

Mars – 10 mins ago  » 

I switched off Red LED in Deep Standby, which is set from 11:30 to 7:30, but this morning at 7:10 the red led was on. Switched the Aura on (it was in deep standby) and checked the setting. Then, I put the box back into deep standby and the red led went off after a minute or two.

Some improvements seem to have been made for DVB-T2, but I have always found these channels to be robust and have more issues with DVB-T channels where signal quality varies wildly at times (although it is usually 100%). This seems to be quite a common issue and is not solved by a variable attenuator so ignore the snakeoil salesmen.

Regarding choosing a region after automatic retunes, I still have channels in the 800s.

I have re-tuned twice bit have not had the option to select region which is a shame as I’m in Cambs however for local ITV news I get Meridian covering Kent and Sussex for some odd reason

Are you receiving channels from two transmitters (channels in the 800s)?

Update received fine and installed, the menu changes are nice and appreciated, as is the inclusion of proper audio passthrough for Plex.

Initial testing of local playback through Plex seems to be variable; some 4k HDR Atmos content plays perfectly, other 4k and 1080P TrueHD content won’t play at all and I just get a black screen until I exit back to the menu.