- This topic has 158 replies, 41 voices, and was last updated 9 years, 10 months ago by
.
-
Posts
-
The main TV is connected to the HDR-1010S via HDMI. The sender is connected to the HDR-1010S via SCART. All TV’s are Sony Bravia.
rekabws – 5 minutes ago »
The main TV is connected to the HDR-1010S via HDMI. The sender is connected to the HDR-1010S via SCART. All TV’s are Sony Bravia.
If you turn off the power completely to the TV do you get your analogue output back ? I don’t get the issue with a direct hdmi to my Panasonic TV. I do though when connected via a Yamaha AV receiver.
rekabws – 1 day ago »
Hi, I seem to be having a similar problem to several other on here. I get the black screen with audio and messages re no HDCP is not valid, AV Blocked but this is on two other TV’s via a video sender when turning the main TV off (e.g. when going to another room to watch one of the other TV’s). The only way I get a picture on the remote TV’s is to leave that main TV on. Any advice would be most welcomed.
Installing the software linked to at the top of this thread should fix it.
Hi, just tried again a few times turning the main TV off completely. Got the same result but immediately instead of the usual 45 seconds delay. I maybe looking in the wrong place but I don’t see a link for any software.
Save you searching for links which appear in the first post of this thread:
http://www.freesat.co.uk/help/got-freesat/fix-a-problem/tv-hdmi-issues
Many thanks guys, looks like that upgrade sorted it. It had software version 3.00.18 and now has 3.00.20. I had tried looking for updates via the Human box but it said there were none available.
Thanks again.
Good news, thank you for updating us.
3.00.18 is the latest publically released software.
3.00.20 is in beta and subject to Humax quality checks. This or a later version number will be released in new year.
This may not be related, but I’ve been having audio dropout issues, which I think started after upgrading to 3.00.18. I am getting holes in the audio of around 1-2 frames, the frequency of which varies from once or twice per programme, to every few seconds. I’ve searched t’interweb for similar issues, and the consensus seems to be that it could be a HDCP timing issue i.e. taking too long to re-negotiate security keys. I have also noticed, though not very often, a dropout on the picture. As a last resort, I’ve loaded 3.00.20, to see if that cures the problem. I’ll report back after observing what happens tonight.
nevans – 13 minutes ago »
This may not be related, but I’ve been having audio dropout issues, which I think started after upgrading to 3.00.18. I am getting holes in the audio of around 1-2 frames, the frequency of which varies from once or twice per programme, to every few seconds. I’ve searched t’interweb for similar issues, and the consensus seems to be that it could be a HDCP timing issue i.e. taking too long to re-negotiate security keys. I have also noticed, though not very often, a dropout on the picture. As a last resort, I’ve loaded 3.00.20, to see if that cures the problem. I’ll report back after observing what happens tonight.
Might be a complete red herring. You weren’t by any chance watching the Father Brown series on BBC 1 HD ? If so it’s a long standing issue with 5.1 ac3 audio on BBC 1 HD.
I think that you’re correct Graham, but I had to try something, a it’s driving me mad!
No, I wasn’t watching ‘Father Brown’, but it doesn’t seem to be related to specific programmes.
nevans – 1 minute ago »
I think that you’re correct Graham, but I had to try something, a it’s driving me mad!
No, I wasn’t watching ‘Father Brown’, but it doesn’t seem to be related to specific programmes.
I had to install the beta firmware on my HDR1000S, but there were no audio issues that I noticed. It was loss of analogue outputs when not viewing same programme via hdmi. Is the issue related to HD channels or both HD and SD ? Is your audio provided by a TV. if only on HD channels and you don’t have a dedicated ac3 AV reciever try Settings – Picture and Sound – Digital Audio Out – Stereo
grahamlthompson – 6 minutes ago »
nevans – 1 minute ago »
I think that you’re correct Graham, but I had to try something, a it’s driving me mad!
No, I wasn’t watching ‘Father Brown’, but it doesn’t seem to be related to specific programmes.
I had to install the beta firmware on my HDR1000S, but there were no audio issues that I noticed. It was loss of analogue outputs when not viewing same programme via hdmi. Is the issue related to HD channels or both HD and SD ? Is your audio provided by a TV. if only on HD channels and you don’t have a dedicated ac3 AV reciever try Settings – Picture and Sound – Digital Audio Out – Stereo
Graham, we’re obviously thinking along the same lines! I’ve already set the output to stereo, thinking that it may be a multichannel problem.
If this doesn’t cure the problem, then I may have to replace the box, as it’s still crashing on a regular basis, and nobody else on the forum seems to be seeing the same problem.
Update: well, I didn’t get any audio dropouts last night, but I don’t want to put a jinx on my system!
I’ll wait and see how it goes over the next few days.
I am having the same issue with a Samsung tv. I can switch off the humax box at the plug and on again. That buys me an extra 20 minutes. I have checked on freesat box and there appear to be no updates. Could someone help me work out how to resolve it please?
Thanks
- You must be logged in to reply to this topic.