HDR 1100s remote control not working.

Forum Forums Freesat HD HDR 1000, 1010, 1100S HDR 1100s remote control not working.

Viewing 15 posts - 1 through 15 (of 34 total)
  • Author
    Posts
  • #18068
    Anonymous
    Inactive

    Hi, we’ve had this box about two months. The remote control is no longer working or, if it does work, it does only one thing then freezes again. What do we have to do to rectify? Thanks in advance.

    #71494
    Anonymous
    Inactive

    Try pulling the power from the box, leave for a few minutes and then restore.

    #71495
    Anonymous
    Inactive

    tried that twice already!

    #71496
    Anonymous
    Inactive

    It’s always a good idea to fully explain what you have already done to try to resolve the problem. Usually saves wasting your time and mine.

    #71497
    Barry
    Moderator

    Welcome to our Forum :-)

    When the remote stops operation do the buttons on the unit still work?

    Have you tried changing the remote batteries?

    #71498
    Anonymous
    Inactive

    Yes the buttons on the unit work and yes the remote had fresh batteries

    #71499
    Barry
    Moderator

    I’m clutching at straws here but….

    Try taking the batteries out of the remote, then press 0 and OK for 30 seconds, replace batteries and try again.

    If that fails to address problem you could try changing the remote code, see our FAQ’s.

    Should that not fix the problem, and as your unit is still under warranty, you need to contact Humax Support for a replacement.

    #71500
    Anonymous
    Inactive

    Hi Barry,

    Just had to jump on and say thank you so much for your advice. My remote stopped working today and I’d tried all the usual turning on and off, changing the batteries etc and still nothing. Found your reply about removing the batteries and pressing 0 and OK, and… it worked! All fully functioning again and you lifted me out of my Saturday grump, so thank you :-)

    #71501
    Barry
    Moderator

    Welcome to our Forum :-)

    Thank you for the feedback, and glad we could help on this occasion.

    #71502
    Anonymous
    Inactive

    When you say press 0 and OK for 30 sec you do mean simultaneously or 0 then OK for 30 sec? I can’t think how this would work when there are no batteries in, but I guess it must.

    #71503
    Martin Liddle
    Participant

    skiday – 13 minutes ago  » 

    When you say press 0 and OK for 30 sec you do mean simultaneously or 0 then OK for 30 sec? I can’t think how this would work when there are no batteries in, but I guess it must.

    My understanding is that the idea is simply to ensure that any residual charge in capacitors is exhausted so the remote will reset it self when the batteries are replaced; works for me.

    #71504
    Anonymous
    Inactive

    Had same problem after 4 weeks just come on here and followed the OK 0 suggestion and Bingo working again. Thanks for the tip saved my sanity and blood pressure

    #71505
    Barry
    Moderator

    OldTar – 7 minutes ago  » 

    Had same problem after 4 weeks just come on here and followed the OK 0 suggestion and Bingo working again. Thanks for the tip saved my sanity and blood pressure

    Welcome to our Forum :-)

    Thank you for the feedback, glad we could help.

    #71506
    Anonymous
    Inactive

    I’ve registered just to thank you for the OK 0 suggestion/solution. Can’t think how it works (with the batteries removed) but it solved my problem! Many thanks.

    #71507
    Barry
    Moderator

    Welcome to our Forum :-)

    Glad we could be of some help.

Viewing 15 posts - 1 through 15 (of 34 total)
  • You must be logged in to reply to this topic.

The inner genius!