Foxsat HDR Signal Problem

Forum › Forums › Freesat HD › FOXSAT HDR › Foxsat HDR Signal Problem

Tagged: 

Viewing 15 posts - 1 through 15 (of 38 total)
1 2 3
  • Author
    Posts
  • January 30, 2020 at 1:29 pm #20944
    Anonymous
    Inactive

    I have checked the two dish signals LBN1 and LBN2 to my HUMAX HDR – 500GB Recorder, and both are ok upto my Recorder, but I cant get my recorder to tune,Post Code not recognised, nothing found when searching for signal.

    It looks to be a problem on my recorder!….any help would be welcome.

    January 30, 2020 at 4:21 pm #94190
    Anonymous
    Inactive

    Presumably you have tried several postcodes? If so it sounds like you are not getting the Freesat ‘Home’ transponder.

    January 30, 2020 at 4:32 pm #94191
    Anonymous
    Inactive

    Hi Trev,…Tried other post codes, also manual tuning on each responder….how do I get home responder?

    January 30, 2020 at 4:46 pm #94192
    Anonymous
    Inactive

    Can’t remember, but someone who can will be along in a mo.

    I just wanted to check that you have tried more than one postcode.

    The postcode is only to get the ‘local’ versions of various broadcasters, so any postcode in the correct ‘region’ will do.

    How exactly have you

    Johnsat – 3 hours ago  » 

    I have checked the two dish signals LBN1 and LBN2 to my HUMAX HDR – 500GB Recorder, and both are ok upto my Recorder

    ?

    January 30, 2020 at 4:52 pm #94193
    Anonymous
    Inactive

    I checked LBN’s with Signal finder/checker connected between room LBN and hummy

    January 30, 2020 at 4:55 pm #94194
    Anonymous
    Inactive

    These are my transponders….

    January 30, 2020 at 4:55 pm #94195
    Anonymous
    Inactive

    These are my transponders….

    January 30, 2020 at 4:57 pm #94196
    Anonymous
    Inactive

    Trying to upload…

    January 30, 2020 at 4:59 pm #94197
    Anonymous
    Inactive

    Sorry, can’t …too large image

    January 30, 2020 at 5:07 pm #94198
    Anonymous
    Inactive

    In manual tuning it actually scans all responders on progress bar but doesn’t result in any channels!…no channels found!

    January 30, 2020 at 6:46 pm #94199
    Anonymous
    Inactive

    What signal finder did you use? The el cheapo ones will give a reading anyway when there is no signal if the sensitivity is turned up high enough.

    Try a manual tune to 11428 H 27500 2/3 which is the freesat home transponder, without this it will report no channels. Check signal quality on this frequency. (Courtesy REPASSAC HERE)

    It is likely the absence of this transponder for some reason or another that is causing your problem.

    January 30, 2020 at 6:58 pm #94200
    Anonymous
    Inactive

    It was an ‘el cheapo’,but I was able to adjust sensitivity up and down.

    On manual tune there is no 11428 H 27500 2/3, however there is 11428 H 27500 A., should I use User Define to add this?

    January 30, 2020 at 7:10 pm #94201
    Anonymous
    Inactive

    If I put the new values in, it only allows me to put in 11428!…how do I insert the rest?

    January 30, 2020 at 7:12 pm #94202
    Anonymous
    Inactive

    In fact when I save 11428, it shows as 11428 A 27500 A

    January 30, 2020 at 7:45 pm #94203
    grahamlthompson
    Participant

    The fact that you get no channels on a full non freesat channel would seem to indicate the lnb has failed.

    Just add any transponder say.

    Frequency 10847 Polarisation V, Modulation DVB-S2, 8PSK Symbol rate 23000, FEC 3/4.

    This is a UK spot beam with a very high field strength.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 38 total)
1 2 3
  • You must be logged in to reply to this topic.

The inner genius!