HDR T2 Wrong System ID

Forum › Forums › Freeview HD › HDR FOX T2 › HDR T2 Wrong System ID

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • June 24, 2022 at 10:47 pm #22569
    Anonymous
    Inactive

    Hi

    Ive just bought a HDR T2 from ebay

    Im trying to install the firmware as it has a few problems hoping to fix them but i always get E-Id Error

    I found out that the system id is wrong its 000000A0 and was wondering how can i fix it to give it the right system id 80BC.7E00

    Any help would be great

    Thanks

    Does anyone know how to fix it

    Ive attached a couple of pics showing System Info and the Error

    Thanks

    [attachment=95849,2173] [attachment=95849,2174]

    June 25, 2022 at 7:48 am #109898
    Barry
    Moderator

    Welcome to our Forum :-)

    Please check your Private Messages for a link to a file that might help.

    June 25, 2022 at 8:14 am #109899
    Anonymous
    Inactive

    Thanks Barry ive sent u a PM

    June 25, 2022 at 8:24 am #109900
    Barry
    Moderator

    junkmanukuk – 9 mins ago  » 

    Thanks Barry ive sent u a PM

    Responded to your message.

    June 25, 2022 at 9:01 am #109901
    Anonymous
    Inactive

    Thanks Barry

    Just done it and the System id has changed to 80BC.7E00 its worked

    Your a star many thanks

    Just a update i reinstalled the firmware that i hoped might have sorted the problem out that when turning it on it wont display a picture and would say on the TV NO Signal and enter some kind of boot loop also the hard drive would spin for a few seconds then stop and the only way i can get it to work is to unplug it for a while then plug it back in then it boots up as normal

    Anyone else had this problem?

    I think i bought a lemon

    February 14, 2023 at 7:39 pm #109902
    Anonymous
    Inactive

    Hi

    I am trying to upgrade my HDR Fox T2 to the latest firmware and I have the same E-ID error as described in this post.

    Apart from the MAC address, everything in my system is identical to the two pictures posted.

    Please could someone provide the file/instructions which will allow me to reset the system id from 0000.00A0 to 80BC.7E00 so that I can update the firmware.

    Thanks

    Dave

    February 15, 2023 at 6:51 am #109903
    Barry
    Moderator

    Hi Dave – Welcome to our Forum :-)

    Check your private messages.

    February 15, 2023 at 1:22 pm #109904
    Anonymous
    Inactive

    Thanks Barry

    The file in the PM worked and the system ID is now correct.

    Dave

    February 15, 2023 at 1:55 pm #109905
    Barry
    Moderator

    Good news :-)

    December 28, 2023 at 5:46 pm #109906
    Anonymous
    Inactive
  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.

The inner genius!