Problem with remote control not working.

Forum › Forums › Freeview HD › FVP 4000T, 5000T › Problem with remote control not working.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 16, 2021 at 9:23 pm #22275
    Anonymous
    Inactive

    Hello,

    I have had to reset my remote control as it had issues the reset when fine, but now when I press any button on the remote control nothing happens the box does not even turn on.

    I have a youview box and when I press any button on the Humax remote control for the FVP 5000T box the remote control turns the youview box on.

    Any help would be appreciated

    Thanks

    Matthew

    November 18, 2021 at 8:24 pm #108107
    Anonymous
    Inactive

    Hello,

    The issue is now fixed.

    Thanks

    February 5, 2022 at 9:43 am #108108
    Anonymous
    Inactive

    Hi

    How did you fix this, please?

    My Remote Controller has stopped working on my Humax HDR 1100S Freesat box and has also decided to control my Youview box instead.

    I have carried out “Remote Control – Reset” instructions…

    “Press the Power and RED buttons at the same time for 5 seconds until the red LED blinks three times.”

    …but the red LED does not blink.

    Batteries are okay as the Youview box is responding.

    The buttons on the box work, i.e. on/off, change channel, change volume, and I have disconnected the power to give a complete reboot.

    I also have a spare Remote which likewise is now controlling the Youview box.

    Am I missing something?

    Rick

    February 5, 2022 at 10:08 am #108109
    Anonymous
    Inactive

    By default the remote controls for Humax Freesat and Freeview boxes do also control Youview boxes.

    The remotes for the Humax Freesat and Freeview boxes can be changed to a different code set so that they do not also control the youview box, but the associated recorders do also have to have their code set changed.

    It sounds as though the code sets being used on your 1100S and its remote have got out of sync with each other.

    For details of how to bring them back in line for the HDR-1100S see

    https://myhumax.org/forum/topic/multi-code-function-hdhdr-remote-2

    For the FVP-5000T the process is the same

    https://myhumax.org/forum/topic/multi-code-function-fvp-remote

    February 5, 2022 at 4:24 pm #108110
    Anonymous
    Inactive

    Thanks Luke, that has resolved the issue.

    I now remember doing that before on an older Humax box quite a few years ago.

    I am greatly relieved. Thumbs up from me! :)

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

The inner genius!