Welcome to our Forum

When TV switches off then press and hold the OK button on the Aura remote for 3 secs for code to be stored.

The red LED will blink three times if the universal remote control setting is successful – caveat I think it blinks twice not 3 times.

Terryfitz – 17 hours ago  » 

Thanks Barry

I’ve done that but a couple of time for the 2 codes that turned the tv off but didn’t get the 3 flashes on the red light to confirm the codes accepted. Some functions such as tv volume control and channel work but there is no response from the top centre buttons tv and av.

Follow the onscreen instructions, as soon as the TV turns off press and hold the ok button until the red light flashes.

Then press the small tv pwr button and the tv should turn back on. If it does, then test the av button.

If either one doesn’t work, start the process again and try another code until you get the right one stored.

Whats a bit odd, is that you say the tv volume and channel buttons were working.

The tv volume can be passed through, but needs to be setup in the aura settings to control either sub or tv volume.

The tv channels on the tv, can’t be changed via the aura remote.

Only 2 infrared controlled signals can be sent to the TV via the aura RM-C01 remote, TV power cycle and AV control.

Hope this helps.