- This topic has 4 replies, 4 voices, and was last updated 5 years, 7 months ago by
.
-
Posts
-
On FVP-5000T, should Tuner 2 and 3 also have signal levels displayed?
Display on Tuner 1 only.
@jpv1960 only active tuners will show signal strength/quality. If you want to see details for all three tuners, you’ll need to start recordings on channels that use different multiplexes. That way they will be active, and details will be shown.
The 4000/5000t is programmed to save as much energy as possible when on.
As a result only tuners that are now required to support the current recording situation are powered. To ensure you get 3 tuners to display you need to start 3 instant recordings from at least 3 multiplexes.
One easy Mux – 1 is BBC1-SD
2nd is ITV-Sd 3
Any one from the 5 channels on the HD Mux. 101, 102, 103. 104 and 105.
Recording from the above greatly increases the number of channels you can record at the same time.
Eg you can always record any 4 of the above at the same time.
Try recording any 4 from the above. You can even record the 5th if you know what you are doing,
Thanks for your replies. Much Appreciated.
- You must be logged in to reply to this topic.