- This topic has 8 replies, 5 voices, and was last updated 6 years, 7 months ago by
.
-
Posts
-
I have bought this freeview box as wanted a recordable one and am only picking up 6 channels when searching, i have had no problems with signal on old box and use exactly the same hdmi and aerial cables so have no clue as to why. I have done automatic search and manual and also replaced this box as we thought it was a machine problem, plz can someone give me some help on this.
calic31 – 6 minutes ago »
I have bought this freeview box as wanted a recordable one and am only picking up 6 channels when searching, i have had no problems with signal on old box and use exactly the same hdmi and aerial cables so have no clue as to why
Please start by telling us the signal strength and quality as reported by the Humax (Menu button>Settings>System>Signal detection)?
Strength is 53 quality 10 just dont understand how old youview box picks up all channels and this one doesn’t
calic31 – 4 hours ago »
Strength is 53 quality 10 just dont understand how old youview box picks up all channels and this one doesn’t
Suggests a issue with the coax cabling plugs. Perhaps a badly fitted Belling Lee Plug (without the centre core being properly soldered, or a whisker of screen touching the centre core. Simply moving the cables may have caused the issue.
Quality should be 100%.
Assuming you have a Freeview TV, disconnecting the aerial input from the box and connecting it directly to the TV. Can it view Freeview channels ?
This might help, give it a try it is easy to do and costs virtually nothing!
I have two Fox T2 Freeview boxes. One is older than the other. On the the older box, there have been intermittent problems with ‘zero’ on both signal quality and strength, as I say, intermittent with no pattern. I could pull the TV and boxes out (the TV and box’s unit is on castors) to inspect the aerial connections and the picture would come back with 100% quality, no apparent rhyme or reason. The newer box is OK. I tried various different aerial fly leads with no improvement. The flyleads are not made from screened cable, they are bought out items with moulded connectors
I’ve read on here or on the other forum (I can’t remember which) about interference being picked up by HDMI leads causing all sorts of problems on various other boxes ….
So, I’ve screened the offending box’s aerial lead by wrapping aluminium kitchen foil around the lead’s entire one metre length and so far no more problems. If this continues, I can make my own flyleads using screened satellite cable and soldering the centre wire.
Why only one box is affected, I don’t know, perhaps the earlier box’s tuner is more sensitive. It may be the case that your new box’s tuner is more sensitive than it’s predecessor.
Give it a try, It might work!
Quote:The flyleads are not made from screened cable, they are bought out items with moulded connectorsOf course they are made of screened cable. The problem is that they are not usually very well screened and ‘leak in’ interference like a colander leaks out water.
The problem with HDMI leads is not that they ‘pick up’ interference, but poorly screened ones from the pound shop radiate the interference at fairly close to the TV RF frequencies, and it’s this interference that can ‘leak into’ pound shop, poorly screened patch leads and screw up (technical term) the TV reception.
In my case, the leads are from different sources supposedly ‘premium’ items. Definitely not from pound shops.
Wotan – 13 minutes ago »
In my case, the leads are from different sources supposedly ‘premium’ items. Definitely not from pound shops.
The cheaper ones generally have less issues with screening. Best to replace your coax interconnects with satellite grade WF100 terminated with f connectors and use F to Belling Lee adaptors when needed.
grahamlthompson – 35 minutes ago »
Wotan – 13 minutes ago »
In my case, the leads are from different sources supposedly ‘premium’ items. Definitely not from pound shops.
The cheaper ones generally have less issues with screening. Best to replace your coax interconnects with satellite grade WF100 terminated with f connectors and use F to Belling Lee adaptors when needed.
Thank you Graham, to be done if the temporary screening works
- You must be logged in to reply to this topic.