- This topic has 9 replies, 4 voices, and was last updated 3 years, 2 months ago by
.
-
Posts
-
I’m hoping someone can suggest a solution to an audio problem I’m experiencing on a new Sound Bar/TV/Humax setup.
I have a Humax HDR-FOX T2 connected via HDMI cable to my Panasonic TV (TX-49DX600B). I have just bought a JBL Sound Bar (BAR Studio) which I’ve also connected to the TV using a second HDMI (ARC) cable. (there are two HDMI ports on the TV; one being ARC)
The problem is that the audio when watching a live TV program or a recorded one has frequent milisecond silent moments. Like the sound is being mutted for a split second. All backgound and speech is effected. It’s consistent and only started happening with the addition of the Sound Bar. I’ve set the TV’s own speakers to zero in case that was clashing.
I think the cables are setup correctly. If anyone has experienced something similar I’d appreciate some advise if you’ve managed to fix it.
Many thanks, Mike
Humax to TV.
TV arc to soundbar arc.
Humax audio set to Stereo.
TV audio set to whatever “normal” option is available, by that I mean turn OFF anything like virtual surround mode (or similar).
Cheers
Chris
Thank you Chris. I’ve ensured the settings are as you’ve described but it’s not fixed the problem I’m afraid. Any other suggestions gratefully received! Mike
Our Humax is connected to the TV, but we take audio (Optical) from TV to Soundbar not the Humax.
We do not have any sound problems.
From the instructions :
TV to soundbar via ARC connections.
Humax direct to soundbar via the other hdmi port.
Ensure hdmi-cec (Viera link I believe it’s called) is activated on the TV.
If this doesn’t work try:
Humax to TV via normal port, TV to soundbar via optical cable. This second option, as per Graham’s suggestion, will almost certainly work. If it doesn’t, something is wrong.
Atb
Chris
https://uk.jbl.com/home-audio/JBL+BAR+2.1.html
Also check your software/firmware version as there is an update.
Cheers
Chris
Thank you Graham. Sadly your suggestion hasn’t cured it. (HDMI and Optical cables)
Thanks to you too Chris for your further suggestions. The Soundbar only has one HDMI port so can’t go that route.
right now I’ve got the Soundbar connected to the TV via the Aux jack plug. That’s stopped the problem but its a shame I’m having to use the last resort route.
I’ll check the JBL software status.
I appreciate the suggestions so far!
Mike
:oops:Apologies, I had mistakenly been reading the instructions for the Bar 2.1,dohhhh.
If it’s working via the aux input then don’t worry, it’s a stereo unit so the l/r of the aux cable is fine. You can use optical instead but I doubt you will notice a difference.
Good to know that the Aux route is good enough! I’ll contact Panasonic to see if they’ve come across this issue and JBL Support too.
thanks again for suggestions.
Mike
Hi Michael – I’ve experienced a similar problem to you, the difference being that my soundbar is a Sonos Arc. Initially it started out with sound randomly cutting out for about 10 seconds, now it manifests as my Panasonic TV losing connection to the Arc.
What I’ve discovered is that this only happens when the TV is also connected to my Humax box. If I disconnect the Humax, the TV can connect to the Arc again.
I put a post on the Sonos forum in hope that someone may be able to help – https://en.community.sonos.com/home-theater-228993/experience-after-5-weeks-with-sonos-home-theatre-6864829
Unfortunately I didn’t find the answer. So today I finally decided to contact Panasonic about the problem. They talked me through a factory reset of the TV and now I’m waiting to see if it helps. With the Humax plugged in the TV usually loses connectivity to the Arc within 24 hours, so I’m waiting to see what happens.
I hope that all sheds a little more light on the situation, if only to say that you’re not mad, other people are having similar problems!
P.S. I’ll update here on whether the fix works or not.
- You must be logged in to reply to this topic.