How do I add non-freesat (FTA) channels?

Forum › Forums › Freesat HD › HDR 1000, 1010, 1100S › How do I add non-freesat (FTA) channels?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 5, 2018 at 2:57 pm #20036
    Anonymous
    Inactive

    I have a HDR 1000S. How do I go about adding (free-to-air) channels from different/multiple frequencies without overwriting when searching the different frequencies?

    For example, say there’re channels that I want from the 12304 H 27500 5/6 frequency and also on the 11553 H 22000 5/6 frequency. How do I go about adding them?

    Thanks

    **** ADMINS – Please delete duplicate post in HB 1000S/1100S forum. Thanks/Sorry.

    August 5, 2018 at 3:12 pm #87187
    Anonymous
    Inactive

    System > Settings > STB Mode.

    Select the prompt and change to non-freesat mode.

    Then use the channel search – you can scan the frequencies you are interested in.

    August 5, 2018 at 4:03 pm #87188
    Anonymous
    Inactive

    REPASSAC – 48 minutes ago  » 

    System > Settings > STB Mode.

    Select the prompt and change to non-freesat mode.

    Then use the channel search – you can scan the frequencies you are interested in.

    Thanks for that but I was querying whether or not the channel list would get overwritten every time I search and save?

    August 5, 2018 at 4:54 pm #87189
    grahamlthompson
    Participant

    conners – 44 minutes ago  » 

    REPASSAC – 48 minutes ago  » 

    System > Settings > STB Mode.

    Select the prompt and change to non-freesat mode.

    Then use the channel search – you can scan the frequencies you are interested in.

    Thanks for that but I was querying whether or not the channel list would get overwritten every time I search and save?

    When you search and save the channels you save are added to the list (even if you have added them before so creating duplicates, unless you delete the existing channels first) ? Because there is no epg other than now and next the logical channel numbers are simply created by adding one to the last saved channel.

    You can edit them afterwards to change the order. Sadly on a G2 box you cannot record non-freesat channels as you could using a Foxsat-HDR.

    If you want to add channel 4-HD you will need to manually add the following transponder and then scan this.

    11127 V DVB-S QPSK 22000 5/6

    August 5, 2018 at 8:49 pm #87190
    Anonymous
    Inactive

    That’s good to know.

    Thanks!!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

The inner genius!