- This topic has 5 replies, 4 voices, and was last updated 7 years, 11 months ago by
.
-
Posts
-
Hi,
I’ve just bought a FVP-5000T and H3. Everything is working fairly well, but still in the learning stage.
One thing I am struggling with is the playback of recordings – it’s very easy on the FVP-5000T but playing recordings on the H3 seems to involve a lot of button pressing to get to the DLNA, then down thru’ a number of folders to actually play something.
Is there an easier way ?
The ‘wife acceptance factor’ for the player is likely low as she’s used to the Sky box and I doubt she could handle all this DLNA stuff.
Any ideas ?
OK,
figured it out. You use TV Player then scroll down into options which then gives you a choice of guide, recording, channels etc.
No need to use DLNA
Are you able to fast forward through advert breaks ok using the H3 & 5000 ? I found with the H3 & 4000 that pressing FF a few times caused playback to stop altogether.
cobson – 37 seconds ago »
Are you able to fast forward through advert breaks ok using the H3 & 5000 ? I found with the H3 & 4000 that pressing FF a few times caused playback to stop altogether.
I’ve checked this a few times as members report problems, and cannot replicate…I have noted the length of skip differs depending on:
1. Duration of timer
2. Whether it is SD or HD
I haven’t investigated this further at this time.
FVP units (4000 and 5000T) plus H3 are connected to network via powerline adaptors.
cobson – 2 months ago »
Are you able to fast forward through advert breaks ok using the H3 & 5000 ? I found with the H3 & 4000 that pressing FF a few times caused playback to stop altogether.
New to the FVP5000/H3 setup and have also noted that if you press FFWD a couple of times or hold the button down, I have the same issue where the recording stops and then goes back to the recording screen. If you try and restart the recording and then FFWD it again, it does the same thing at the same point. At the moment I even taken to not ffwd recordings whilsty I try and sort it out.
- You must be logged in to reply to this topic.