- This topic has 10 replies, 5 voices, and was last updated 8 years, 2 months ago by
.
-
Posts
-
Is there a permanent fix for the EPG problem on the PVR 9150T, mine only populates 2 days, the rest of week is sparsely and randomly populated, used to fully populate when new, Manual tuning does not help.
I am on the crystal palace transmitter, and do a manual search on channels 23 26 25 22 28 29, unfortunately I Watch programs from all these channels
micken – 38 minutes ago »
I am on the crystal palace transmitter, and do a manual search on channels 23 26 25 22 28 29, unfortunately I Watch programs from all these channels
Those are the multiplex frequencies not broadcast channels. Do you watch all the channels on each multiplex ? Each one has many channels multiplexed onto the UHF frequency.
grahamlthompson – 2 hours ago »
Have you tried deleting channels you don’t ever watch ?
My understanding is that deleting channels alone does not help. The trick is reducing the number of multiplexes tuned but if the OP wants to be able to watch programmes from all multiplexes then that isn’t an option.
I don’t want to take up to much of your time, I just wondered if there was a permanent hardware repair that can be done to solve the epg problem on these old pvr’s.
micken – 14 hours ago »
I don’t want to take up to much of your time, I just wondered if there was a permanent hardware repair that can be done to solve the epg problem on these old pvr’s.
No. The problem is that the hardware was designed when there were fewer channels and it is now short of memory and CPU power and neither can be enhanced. There are plenty of reports that tuning in only three multiplexes gives very acceptable performance but at the cost of limiting the number of available channels.
thanks for the reply’s, it is still usable even with 2 days epg
micken – 12 minutes ago »
thanks for the reply’s, it is still usable even with 2 days epg
It shouldn’t be quite that bad.
The gaps are aggravated if you tune into multiple transmitters, even if you can then identify which are the duplicates and manually delete them.
Have you tried manually tuning into just 1 transmitter having started off with a clean slate?
For instructions see http://myhumax.org/forum/topic/week-old-9300t-and-epg-wont-fill-up-for-week#post-7097
Luke – 2 hours ago »
micken – 12 minutes ago »
thanks for the reply’s, it is still usable even with 2 days epg
It shouldn’t be quite that bad.
The gaps are aggravated if you tune into multiple transmitters, even if you can then identify which are the duplicates and manually delete them.
Have you tried manually tuning into just 1 transmitter having started off with a clean slate?
For instructions see http://myhumax.org/forum/topic/week-old-9300t-and-epg-wont-fill-up-for-week#post-7097
Yes I agree, my friend’s 9300 has a full EPG tuned to all available multiplexes from Waltham.
Thanks everyone, I have solved the problem by buying a graded HDR 1800t from Humax, when I have finished watching everything on the PVR9150t, I will give it to a charity
- You must be logged in to reply to this topic.