Forum › Forums › Freeview HD › HDR FOX T2 › Dull Picture
Tagged: Dull Picture, HDR-FOX T2
- This topic has 9 replies, 5 voices, and was last updated 10 years, 1 month ago by
Anonymous.
-
AuthorPosts
-
October 10, 2015 at 9:59 pm #17174
Anonymous
InactiveWhen I play back a recording the picture on the tv is dull,its like looking through smokey glass,the picture is clear and sharp just dull,when I watch the tv via the antenna its bright and clear,so it is not the tv,this only started a couple of days ago,this recorder has given no trouble since I bought it a few years ago.can anyone help with this dull picture.Thank You.Longlegs
October 11, 2015 at 8:34 am #64360Anonymous
InactiveWhat is the picture like if you watch live – but using the PVR? If it is dull as well I’d check your connections – do you use a SCART or an HDMI connector? SCART connectors sometimes partially fall out of the socket and can give the symptoms you mention. Don’t know whether similar problems occur with HDMI. Try removing and reconnecting the cable between the Humax and the TV and see if anything improves.
October 11, 2015 at 9:33 am #64361Anonymous
InactiveEEPhil if I watch live the picture is still dull.it is connected to the tv via HDMI cable,i have checked all the connections I have removed and replaced them but the picture is still dull.the recorder has worked without fault for years until a couple of days ago.Thank You.Longlegs
October 11, 2015 at 11:02 am #64362grahamlthompson
ParticipantHas someone messed with the TV settings for the HDMI port the box is connected to ? Have you tried a different HDMI port on the TV ? Have you tried a different HDMI cable ?
October 11, 2015 at 2:17 pm #64363Anonymous
Inactivegraham thank you,i tried a different HDMI port and the picture is now back to normal,i only have 2 ports on this tv,when I put the cable back into the other port the picture went dull again,so I have now put it back into port 2 and it is back to normal,any idea why it is dull from port 1.Thanks Again.Longlegs
October 11, 2015 at 2:26 pm #64364Barry
ModeratorThat would appear to back up Grahams TV settings comment.
Can you adjust picture settings for each HDMI port?
Options are usually something like – Normal/Standard, Vivid, Custom…
October 11, 2015 at 2:27 pm #64365Anonymous
Inactivelonglegs – 9 minutes ago »
graham thank you,i tried a different HDMI port and the picture is now back to normal,i only have 2 ports on this tv,when I put the cable back into the other port the picture went dull again,so I have now put it back into port 2 and it is back to normal,any idea why it is dull from port 1.Thanks Again.Longlegs
Many TV’s have settings for each port.
October 11, 2015 at 3:11 pm #64366Anonymous
InactiveBarry there are no picture settings for each port on my tv,there are picture setting Normal/Standard,Vivid and two Sport settings,This is set on Standard,there is no mention of each HDMI port.Thank You.Longlegs
October 11, 2015 at 3:35 pm #64367grahamlthompson
Participantlonglegs – 20 minutes ago »
Barry there are no picture settings for each port on my tv,there are picture setting Normal/Standard,Vivid and two Sport settings,This is set on Standard,there is no mention of each HDMI port.Thank You.Longlegs
They don’t normally mention it, but generally in the major makers Sony, Panasonic, Samsung LG etc any adjustments are port specific. On my Panasonic you can actually copy settings from a specific HDMI port to others (It is an advanced model though). Check the settings you have for the port you are using, switch to the unused one, are they the same ?
October 12, 2015 at 5:45 am #64368Anonymous
Inactivegraham I cannot find anything about ports or HDMI in the settings on my tv,its a LG tv about 7yrs old,its now working from HDMI 2,so I am going to leave on that and if that stops working get a new tv,i would like to thank everyone for there help.Longlegs
-
AuthorPosts
- You must be logged in to reply to this topic.