- This topic has 5 replies, 5 voices, and was last updated 11 years, 2 months ago by
.
-
Posts
-
Having recently retuned the box, my wife clicked on one of the new stations ‘Vintage TV’ and now it appears to be locked on to this station, regardless to what we do – switch on/off/disconnect/everything I can think of.
Any thoughts would be appreciated.
Terry
Yellow Peril – 13 minutes ago »
Having recently retuned the box, my wife clicked on one of the new stations ‘Vintage TV’ and now it appears to be locked on to this station, regardless to what we do – switch on/off/disconnect/everything I can think of.
Vintage TV is an IPTV channel ie content is delivered over the Internet rather than via the aerial and I assume the 9200 doesn’t expect it. What happens if you remove the aerial before powering up; can you then get control to do a reset to default settings? If you can get control then may be worth deleting all the IPTV channels which currently are broadcast channels 225 to 243. to avoid a repetition.
Martin Liddle – 17 minutes ago »
What happens if you remove the aerial before powering up; can you then get control to do a reset to default settings?
No reset to defaults is required.
I have just deliberately locked one of my 9200Ts.
Having removed the aerial if the 9200T is power up from scratch (after being switched off at the mains) then when I switched it out of stand-by there was just enough time (with remote at the ready) to press 1 on the remote and get it to switch to BBC1 and get the ‘No signal’ message. Plugging back the aerial obviously restores reception and then the edit channel function can be reached to delete the IPTV channels.
Thanks – have just successfully carried out this procedure. Haven’t as yet deleted the suspect channels, but will do when I can work out which are PPTV channels (it doesn’t list them as such under the edit channel section) and when I can work out which delete key to use
Terry
You need to delete channels 225 thru to 243.
Menu
Edit Channels
Edit Channel Lists (default password is 0000)
Highlight each channel in turn and press OK, once you have highlighted all those you wish to delete, scroll right and highlight delete, press OK. Press back or exit and confirm you want to save.
I have found that the above mentioned channels lock up a 9200 but the 9300 seems to cope, delete them as advised to avoid accidentally selecting any of them.
- You must be logged in to reply to this topic.