- This topic has 3 replies, 4 voices, and was last updated 11 years, 1 month ago by
.
-
Posts
-
Hi, posted this elsewhere as well, connected a LAN cable to my 2000T, went into settings, configured LAN, it told me I was connected to network but when I tried the Portal button it tells me I’m not connected. What am I missing? Thanks.
1) Try a different port on your hub. One that you know is working.
2) Goto to Humax->Settings->System->Internet Settings. If connected it should have a picture that has LAN in it and “Network Connected”
3) If not connected. Click OK on option “Configure LAN”, then check option “Configure IP”. Is this set to manual or DHCP? If manual try DHCP if your router supports it. The router will automatically fill in the details if it is confgigured for DHCP (this means it gives you all values to connect to the Internet). use manual if you want to give the Humax a unique “IP address” on your home network. eg 192.168.1.55.
3) If still not connected, check your router. Has it got settings to block (firewall) all external traffic to your humax.
jerryb – 1 month ago »
connected a LAN cable to my 2000T, went into settings, configured LAN, it told me I was connected to network but when I tried the Portal button it tells me I’m not connected. What am I missing? Thanks.
First thing to try is putting the box in standby, waiting until the drive stops spinning, then turn off the mains supply, wait 30 seconds and turn it on again. There is something slightly odd about the Humax networking that some times needs a power cycle to sort out,
Also, rebooting your router is a good idea.
- You must be logged in to reply to this topic.