- This topic has 4 replies, 2 voices, and was last updated 11 years, 10 months ago by
.
-
Posts
-
Hopefully this query is fairly easy to answer in the right hands.
I’ve just bought a used Foxsat PVR and during set up on my TV I did a factory reset however I think this might have erased the up-to-date firmware because it now tells me it’s running HPRSFCI 1.00.17 and suffers hanging of EPG (I say this assuming there was up-to-date firmware on there). Anyway I’m good to do the manual flash upgrade to HPRSFCI 1.00.21 (per this site) but just want to check a few things with someone who knows:
1. That HPRSFCI 1.00.21 is the latest firmware (I realise the machine is now a few years old)
2. That it incorporates the preceding upgrades and will therefore fix the notorious EPG problem
3. Whether there is anything else I should know (aware of the USB stick issue)
Advice welcome.
Welcome to our Forum
It must have only had 1.00.17 – factory reset does not revert software versions.
1. 1.00.21 is latest publically released version.
2. Yes to incorporating all previous versions. No EPG issues that I am aware of.
3. Go ahead and upgrade nothing to be wary of.
Hi Barry,
Thanks for your quick reply – great to have that confirmation.
I’ll do the upgrade and hopefully benefit from the various improvements including a stable EPG.
I did a fair bit of rooting about for some info on the issue and m.h.o. saved the day. There is much to know on here.
Barry,
A quick line to confirm the update worked fine and all appears well. The only stick I have is a 8Gb HP one so I thought I would give it a go. I formatted it as per instructions and it worked fine.
Thanks again.
- You must be logged in to reply to this topic.