- This topic has 9 replies, 4 voices, and was last updated 11 years, 10 months ago by
.
-
Posts
-
is it possible to find out the size of the hard drive, we have two PVR-9150T units, and they were disconnected, now we don’t know which is the I TB and which is the 500GB, any help would be greatly appreciated.
Thanks for replying, but that only shows what % is left free on the drive
Does it not list the amounts Free, Used, etc on the right hand side of the graphical representation of the HDD?
yes, 159.9 used and 30% free, so have I a 500gb drive or a 1TB drive, I just haven’t the knowledge to work it out.
modus – 12 minutes ago »
yes, 159.9 used and 30% free, so have I a 500gb drive or a 1TB drive, I just haven’t the knowledge to work it out.
That sounds more like a 250GB drive; 250*70/100 = 175GB used.
Not sat in front of a unit presently, so this is from memory.
Look to the right of that graphic, does it not state in GB how much is used, free, reserved etc, from that info it should be obvious which unit has what HDD I would have thought.
On the right hand side it has “Total”
A 320GB drive will have a “Total” of 314 GB
This means that …
A 160GB drive will have a “Total” of about 157GB
A 250GB drive will have a “Total” of about 245GB
A 500GB drive will have a “Total” of about 491GB
A 1000GB drive will have a “Total” of about 982 GB
Sorry that’s for a 9200T.
The 9150T on software 1.00.26 the “Total” is the capacity give or take 0.3 GB.
Thank you for all you help, I had to find out as I have two units, one has developed a fault and I have been emailing Humax direct to try and get it resolved, if the unit has to be returned I need to know which one it is for the receipt and guarantee, Thanks again for help, its great to find helpful people like you all.
- You must be logged in to reply to this topic.