- This topic has 4 replies, 5 voices, and was last updated 11 years, 1 month ago by
.
-
Posts
-
I have two Humax machines. One has stopped recording. I can’t do an instant record. I can use the guide to highlight a programme, press OK to register it to record, and get asked if I want a single programme or the series. It then appears on the Recording Schedule. Then – nothing! Very frustrating it is, too.
Hardware version: Rev 1.0
Software version: UPTTF 1.00.26
Loader Version: a 4.37
System ID: 3023.0000
Update date: July 7, 2011
Separate, but related question: where can I check when the software updates are being broadcast? The industry site I was looking at doesn’t seem to give that info any more.
TomT
In MENU has the RECORD option at the top been replaced by GAMES at the bottom? If so the machine has failed to recognise the hard disk, first try shutting down to STANDBY then switch off at the mains for a minute and see if RECORD reappears in the menu when you restart.
This site will show you software downloads, or just keep an eye on this forum as there will be talk if (and it’s a big IF) new software is on the cards.
TomT – 47 minutes ago »
One has stopped recording. I can’t do an instant record. I can use the guide to highlight a programme, press OK to register it to record, and get asked if I want a single programme or the series. It then appears on the Recording Schedule.
I would suspect that file system has become corrupt; if that is the case then the fix is to watch any important recordings and then format the drive from the HDD Control menu item on the Record Menu.
I had a similar problem with a second hand 9200t I bought very recently. I did exactly what Martin above suggested it works again now
Thanks again to Martin as I had similar problems and had tried various things to no avail. I did as he said and it works like magic, so much more responsive as we’ll.
- You must be logged in to reply to this topic.