- This topic has 11 replies, 3 voices, and was last updated 12 years, 6 months ago by
.
-
Posts
-
I’ve tried to download the update but nothings happening. It says download progress should be on screen, I’ve got no signal with the usb stick in and front panel showing bbc1??
OK I’ve got it to download but my TV screen is green with no programs? HELP
Also I can’t access any menus, the humax logo comes on at initial boot up then when normally a channel comes on its the green screen!
Tried re-loading the software, turning the machine off/on again.
Need HELP.
andy96j – 29 minutes ago »
Also I can’t access any menus, the humax logo comes on at initial boot up then when normally a channel comes on its the green screen!
Sounds like an HDMI handshake problem. What make and model of TV? have you tried a different HDMI port on the TV? If the TV supports CEC try turning it off on the HDMI port the Humac is connected to.
It was working fine until I did the update. I will try another port but would it be that as it already has been working with the current port?
T.V is a Samsung UE46B7000
Tried another port, no difference, whats CEC?
I’m thinking of installing the old version back on see if it works then.
Turned off the Anynet/CEC. Still no good.
Now I’m in real trouble, I’ve put the old version back on and still nothing!
Deep breath, then take one thing at a time, try
1. Power on TV first then Humax if no success try
2. Humax first the TV, if no success try
3. Scart connection to try and get everything back to a working config then
4, Reconnect HDMI and cycle through resolutions using the vformat button see if you can find one that works.
5, Check Samsung website see if there is an update for your model of TV?
Bingo, it was the TV. Just needed a re-boot for some reason.
Thanks for all your help.
panic over.
Cheers
Andy.
- You must be logged in to reply to this topic.