Topic: Time change

This topic has 20 replies, 8 voices, and was last updated 12 years, 8 months ago by raydon.

Viewing 15 posts - 1 through 15 (of 21 total)

1 2 →

Author

Posts
March 31, 2013 at 8:25 am #14532

Anonymous
Inactive

For some odd reason my time has jumped 2 hours !! How do I get it set correctly ?

March 31, 2013 at 10:23 am #43246

Barry
Moderator

Standard or custom software?

Mine is correct on standard software, same on all my Humax kit.

March 31, 2013 at 10:25 am #43247

grahamlthompson
Participant

Mines 1 hr fast as well – Custom Firmware installed if that’s relevant

March 31, 2013 at 10:33 am #43248

Barry
Moderator

grahamlthompson – 7 minutes ago »

Mines 1 hr fast as well – Custom Firmware installed if that’s relevant

Maybe….couple of posts on DS/AV would appear to confirm :

March 31, 2013 at 10:40 am #43249

Anonymous
Inactive

Time correct here using the custom firmware. Although I did have to turn it on to find out as I run power-saving mode so it does not display the time in standby.

My Humax Youview box recorded a programme at 02:30am BST correctly which shows that got it right. My Digitalstream woke up ready for BTCC at the right time though that does have a 3am housekeeping event which would sorts things out. As the Foxsat also has a 3am housekeeping event I am surprised people are seeing problems.

March 31, 2013 at 10:40 am #43250

grahamlthompson
Participant

Barry – 6 minutes ago »

grahamlthompson – 7 minutes ago »

Mines 1 hr fast as well – Custom Firmware installed if that’s relevant

Maybe….couple of posts on DS would appear to confirm :

Strange thing is epg is correct via the webif. Set a recording at 12:00 to see if it records.

March 31, 2013 at 10:49 am #43251

grahamlthompson
Participant

Posts on AV seem to confirm it’s CF related. Reflashing with 1.0.21 corrected the clock.

March 31, 2013 at 11:08 am #43252

grahamlthompson
Participant

Recording failed. Setting a manual recording in about 10 mins time tells you you can’t reserve a past event. Checking a manual recording set one hour ahead of correct time.

March 31, 2013 at 11:22 am #43253

grahamlthompson
Participant

Manual timers set +1 hr work OK. Converting recordings to manual and adding the hour should work as a temporary workaround.

March 31, 2013 at 12:25 pm #43254

Anonymous
Inactive

Graham, mine is fine. Try a standby cycle (using the remote)

March 31, 2013 at 1:52 pm #43255

Anonymous
Inactive

Barry – 3 hours ago »

Standard or custom software?

Mine is correct on standard software, same on all my Humax kit.

custom software

March 31, 2013 at 1:52 pm #43256

grahamlthompson
Participant

REPASSAC – 22 minutes ago »

Graham, mine is fine. Try a standby cycle (using the remote)

Thanks David, done that, reflashed to 4.1.1, powered off for 10 min, reloaded guide. Still the same instant record gets the name of the programme 1 hr ahead.

telnet returns the correct data though

Sun Mar 31 13:37:56 BST 2013

March 31, 2013 at 2:31 pm #43257

grahamlthompson
Participant

Possibly very good news

http://www.avforums.com/forums/18770570-post124.html

Meantime I am using manual recordings for this evening.

March 31, 2013 at 2:42 pm #43258

Anonymous
Inactive

I wonder if there’s a quick fix on the custom firmware that could be added easily, such as a “EPG -1 hour” checkbox added to the custom firmware web interface settings page.

March 31, 2013 at 2:51 pm #43259

grahamlthompson
Participant

zeke – 8 minutes ago »

I wonder if there’s a quick fix on the custom firmware that could be added easily, such as a “EPG -1 hour” checkbox added to the custom firmware web interface settings page.

Raydon has surfaced with a fix

http://www.avforums.com/forums/18770758-post128.html

It works as well just flashed it.
Author

Posts