- This topic has 2 replies, 2 voices, and was last updated 13 years, 2 months ago by
.
-
Posts
-
Hi new 9300t when watching program’s a see thru image continually scrolls across the pictures it says 03 and some writing below did retune just the same anybody else had this problem please or no a fix.
Are you using a scart cable, if so it’s a common problem arising from using a poorly screened scart cable. Try a fully screened scart cable. The TV’s tuner outputs the channel it’s tuned to on the scart cable, crosstalk transfers the output to the input as a ghost image. It’s possible to resolve the problem by removing the output pins from the scart plug at the TV end.
grahamlthompson – 7 minutes ago »
Are you using a scart cable, if so it’s a common problem arising from using a poorly screened scart cable. Try a fully screened scart cable. The TV’s tuner outputs the channel it’s tuned to on the scart cable, crosstalk transfers the output to the input as a ghost image. It’s possible to resolve the problem by removing the output pins from the scart plug at the TV end.
Thanks yes the scart that came with the box my area Tyne tees the last one for the freeview change over then get a better scart lead.
- You must be logged in to reply to this topic.