foxsat HDR

Forum Forums Freesat HD FOXSAT HDR foxsat HDR

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #13156
    Anonymous
    Inactive

    I have had a foxsat HDR 500GB PVR fitted. It will not get past postcode, I have tried several others. I live in NE London. It is connected va a 60cm dish which gives 85/100% strength and quality. It has downloade over 450 various channels including of course all the regional ones. It is receiving ok on the Eurobird 28.2. I can’t find BBC HD and when i checked the transponder for 10847 V 23000 there was no signal. All the others seemed fine.

    The EPG is not loading properly, it comes up only after pressing the channel and then only for a couple of hours ahead.

    ITV HD is there and a good picture.

    Is this a box problem as the dish strength seems good.

    Any suggestions?

    #31758
    grahamlthompson
    Participant

    Hi welcome to the forum. Most likely reason, you have a local source of rf interference around 10847. Try turning off anything wifi especially wireless routers (BT Home Hubs are well known for creating this sort of problem), also try cordless phones. Moving or just re-orientating any kit you find may help.

    #31759
    Anonymous
    Inactive

    no router nearby or landline now, as i had Virgin removed and replaced with freesat.

    #31760
    grahamlthompson
    Participant

    simon.h – 51 seconds ago  » 

    no router nearby or landline now, as i had Virgin removed and replaced with freesat.

    Try turning it off anyway, if you have one it may be near the lnb. It could be even at a neighbours. The loss of the BBC-HD transponder is most odd. It’s a 1N transponder and it’s pretty strong in the UK. When you checked did you select DVB-S2 ?

    #31761
    Anonymous
    Inactive

    no, does that come up automatically when you select the transponder?

    #31762
    grahamlthompson
    Participant

    simon.h – 20 minutes ago  » 

    no, does that come up automatically when you select the transponder?

    Hang on I will check for you when the better half has finished watching. In any case if you go into manual tune and select the all transponders and then up (or scroll to the the end of the list) you can add any transponder and the box will display quality and signal strength. For refernce my 60cm gives 100/100 for all 28.2 channels. Eutelsat28A (28.5E) is not as strong.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.

The inner genius!