- This topic has 6 replies, 2 voices, and was last updated 13 years, 7 months ago by
.
-
Posts
-
Recently purchased Fox T2 (1TB).
Also have Foxsat HDR.
If I am watching Foxsat and Fox t2 (in sby) starts recording, then the foxsat turns off!
Both connected via neet switch to the only hdmi connection on Sony tv.
Is there a solution?
The neet switch auto selects the last powered input. When the FOX wakes up to record it powers up the hdmi for a short period and steals the hdmi link. Short of using a manual switch or reselecting the right input after it happens there’s not much you can do.
Welcome to the forum by the way
Thank you for your response.
If I had a tv with 2 hdmi connections would I have the same problem.
Thank you also for the welcome
gillw – 5 minutes ago »
Thank you for your response.
If I had a tv with 2 hdmi connections would I have the same problem.
Thank you also for the welcome
No unless it was a Panasonic and one of the boxes uses AV1. (this also autoswitches like the neet hdmi switches do).
A AV amp with two HDMI inputs would also solve the problem.
I have a HD FOX T2 that gave me similar problems with a Neet switch sharing one of the hdmi inputs on my Denon amp. Giving it a seperate hdmi in on the amp sorted it out.
Thanks again for your reply.
Tv getting old (2006). Perhaps more sensible to buy a new one?!?
gillw – 10 minutes ago »
Thanks again for your reply.
Tv getting old (2006). Perhaps more sensible to buy a new one?!?
Sounds like a plan
Have new tv with 4x hdmi’s. No switching problems!
Thanks very much for your help.
- You must be logged in to reply to this topic.