- This topic has 4 replies, 5 voices, and was last updated 13 years, 7 months ago by
.
-
Posts
-
Hi all, I’ve got a humax hdr t2 and have just done a full channel rescan for the london digital switchover as prompted by the box.
It’s saved all the new channels fine and live tv is good. when i try and watch a recording i get a blue screen with the ‘powered by Connect-TV’ message in the corner but still get the sound from the recording. I can FF, rewind etc and the sound matched the instruction but i only see the blue screen.
Any ideas??
scubafraggle – 15 minutes ago »
watch a recording i get a blue screen with the ‘powered by Connect-TV’ message in the corner but still get the sound from the recording.
What channel is the recording from?
I have seen this, it only seems to happen after I try to view channels ‘powered by Connect-TV’. The only way out that I found is to turn off the T2 wait for a count of 10 then turn on. Putting the unit in standby does not work.
Andy
Its the new Racing Channel that causes it.
If you tune to it, it freaks the Humax out.
If you then tune to another channel, the MHEG for the racing channel is still loaded. Only way I managed to get rid was to reset the box.
Another reason why Humax need to update the MHEG on our boxes.
Barry, you might want to mention this bug to Humax?
As the IPTV services are not supported, I would recommend that channels 110 thru 116 are deleted to save users from experiencing the problems highlighted in this thread.
If you should inadvertently view 116, and have ethernet connected to your unit, then placing into standby for approx 15 seconds and then on again appears to clear the problem.
- You must be logged in to reply to this topic.